Exploring microstencils for sub-micron patterning using pulsed laser deposition
ثبت نشده
چکیده
The possibilities of sub-micron patterning by means of microstencils using pulsed laser deposition were investigated. Stencils with circular and elliptical patterns were used, with pore sizes ranging from 1 μm down to 500 nm. Strontium titanate (SrTiO3), silicon (Si) and self-assembled monolayers on gold were used as substrate materials, whereas nickel (Ni), nickel oxide (NiO) and gold (Au) have been deposited. The results show that the chosen deposition setup makes an easy and fast way for high-quality pattern creation. PACS 81.15.Fg; 81.16.Rf; 68.37.Ps
منابع مشابه
Ordered YBCO sub-micron array structures induced by pulsed femtosecond laser irradiation.
We report on the formation of organized sub-micron YBa(2)Cu(3)O(7) (YBCO) dots induced by irradiating femtosecond laser pulses on YBCO films prepared by pulse laser deposition with fluence in the range of 0.21 approximately 0.53 J/cm(2). The morphology of the YBCO film surface depends strongly on the laser fluences irradiated. At lower laser fluence (approximately 0.21 J/cm(2)) the morphology w...
متن کاملDirect patterning of complex oxides by pulsed laser deposition through stencils
The possibilities to grow isolated structures of complex oxides by pulsed laser deposition through stencils were investigated. A stencil consisting of a SiN membrane with apertures of several hundred nanometers embedded in a Si chip is placed in front of a heated substrate (up to 750 degrees Celsius). Deposition through these apertures results in resistless, direct patterning by local depositio...
متن کاملLaser Sub-Micron Patterning of Rough Surfaces by Micro-Particle Lens Arrays
Laser surface patterning by Contact Particles Lens Arrays (CPLA) has been widely utilized for patterning of smooth surfaces but there is no technique developed by which CPLA can be deposited on a rough surface. For deposition of CPLA, conventional techniques require the surface to be flat, smooth and hydrophilic. In this study, a new method for the deposition of CPLA on a rough surface is propo...
متن کاملNanosecond Laser Surface Patterning of Bio Grade 316L Stainless Steel for Controlling its Wettability Characteristics
In this work, potential of the nanosecond laser processing technique on manipulating the surface wettability of 316L bio grade stainless steel is investigated. Results show that the steel wettability toward water, improves significantly after the laser treatment. Different analyses are assessed in correlation with wettability using Scanning Electron Microscope (SEM), Scanning Tunneling Microsco...
متن کاملPulsed Laser Deposition and Epitaxy
Laser is a powerful tool in many applications. It is especially useful in material processing. Thanks to it's narrow frequency bandwidth, coherence and high power density this instrument is used in many scientific research works and experiments. Often the light beam is intense enough to vaporize the hardest and most heat resistant materials. Besides, due to its high precision, reliability and s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004