A novel zero-voltage and zero-current-switching PWM full-bridge converter using two diodes in series with the lagging leg
نویسندگان
چکیده
This paper proposes a novel phase-shifted zerovoltage and zero-current-switching (ZVZCS) pulsewidth modulation full-bridge converter, which realizes ZVS for the leading leg and ZCS for the lagging leg. A blocking capacitor is added in series with the primary winding of the transformer to make the primary current decay to zero during zero state to ensure ZCS for the lagging leg. In order to prevent the primary current from reversing during zero state, two diodes in series with the lagging leg are added. The principle of operation, steady-state analysis, and design procedures are presented. The experimental results are also included to verify the theoretical analysis.
منابع مشابه
Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملZero-Voltage and Zero-Current-Switching Full-Bridge PWM Converter Using Secondary Active Clamp
A new zero-voltage and zero-current-switching (ZVZCS) full-bridge (FB) pulsewidth modulation (PWM) converter is proposed to improve the performance of the previously presented ZVZCS FB PWM converters. By adding a secondary active clamp and controlling the clamp switch moderately, ZVS (for leading-leg switches) and ZCS (for lagging-leg switches) are achieved without adding any lossy components o...
متن کاملSoft-switching dual full-bridge converter with reduced circulating loss and voltage stress of secondary rectifier
Abstract. This paper proposes a novel soft-switching dual full-bridge converter with shared lagging leg and dual outputs in series. Resonant clamp circuits are employed across the secondary rectifiers to reduce the voltage overshoots of the secondary rectifiers, as well as extinguish the primary current during the freewheeling interval. Full Zero-Voltage-Switching (ZVS) range of the lagging leg...
متن کاملDesign Consideration for High Power Zero Voltage Zero Current Switching Full Bridge Converter with Transformer Isolation and Current Doubler Rectifier
This paper presents the design and analysis and of the proposed zero voltage zero current switching (ZVZCS) full bridge dc-dc converter with transformer isolation and current doubler rectifier for high power and high performance by introducing ZVS for lagging leg and ZCS for leading leg operation It has a simple and robust structure with asymmetrical shifted pulse width modulation technique. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEEE Trans. Industrial Electronics
دوره 48 شماره
صفحات -
تاریخ انتشار 2001