The Method and Results Using Seebeck Calorimetry
نویسنده
چکیده
The characteristics of and errors associated with Seebeck calorimeters, as applied to the Fleischmann-Pons Effect, are described. This type of calorimeter as well as a flow type calorimeter were used to measured apparent excess energy from the same sample of platinum plated with palladium and other materials.
منابع مشابه
Seebeck Envelope Calorimetry with a Pd|d2o+h2so4 Electrolytic Cell
Anomalous excess heat in Pd|D2O+H2SO4 electrolytic cells was confirmed using an accurate method of heat measurement, Seebeck Envelope Calorimetry. A cell was placed in the calorimeter, which measures the output heat flux directly and avoids many of the problems other methods have. The maximum excess power thus far was 1.3 W (or 11 W cm3) with input power of 13 W at a current density of 0.4 A c...
متن کاملMeasurement and comparison of the temperature-dependence of refractive index of water and Plexiglas phantoms by interferometry method for their use in optical calorimetry
In radiation calorimetry by using laser beams and interferometry setups, variations induced by dose absorption in phantom can be precisely measured. Dose absorption and the induced temperature change result in refractive index variation of the material. In order to be able to measure the low amount of absorbed dose in the phantom, temperature dependence of refractive index of the material must ...
متن کاملCharacteristics of Excess Heat in Pd|D2O+D2SO4 Electrolytic Cells Measured by Seebeck Envelope Calorimetry
Pre-electrolysis at the boiling point in open Pd|D2O cells is an effective method to activate a palladium cathode, which can produce excess power in subsequent electrolysis in closed systems for several months. The reproducibility is 23/45. Another characteristic of excess heat is the apparent resistance of electrolytic cell changes irreversibly with temperature.
متن کاملEXCESS HEAT REPRODUCIBILITY AND EVIDENCE OF ANOMALOUS ELEMENTS AFTER ELECTROLYSIS IN Pd|D2O+H2SO4 ELECTROLYTIC CELLS
Electrolyte temperature is a key factor in excess heat production using Pd|D2O+H2SO4 electrolytic cells. Best results are obtained when the electrolyte temperature is close to the boiling point. Stable excess heat is generated by events on or near the Pd cathode surface. In addition to the stable excess heat, heat bursts are sometimes observed. These occurred most frequently in experiments usin...
متن کاملSurveying the effects of silver nanoparticle on thermal properties of some calyx [4]arene compounds by Differential Scanning Calorimetry (DSC)
One of the best and the most active ways for surveying thermal behaviour of materials is using differential scanning calorimetry. In this paper, the authors have studied thermal behaviour for Schiff base ligand and their synthesized Cobalt, Nickel complexes. In this method, the sample is opposed to a controlled temperature change and its physical properties. Here we studied melting point and Tg...
متن کامل