Pore Solution pH for the Corrosion Initiation of Rebars Embedded in Concrete under a Long-Term Natural Carbonation Reaction

This paper presents an in-situ inspection and experimental investigation on the pore solution pH of concrete cover for the corrosion initiation of rebars under a long-term natural carbonation reaction. A 77-year-old steel mill was inspected, and 35 concrete column cover samples were collected to test the pH of the pore solution and phase compositions layer by layer. The variation in pH and phase compositions of the concrete along the cover depth was studied. The in-situ inspection results indicate that the rebar embedded in concrete had begun to corrode when the carbonation depth was almost less than one-third of the cover depth. The corrosion initiation of rebars embedded in concrete can occur when the pH is between 11.3 and 12.1. The pore solution pH test results and X-ray diffraction (XRD) analysis indicated that there is a semi-carbonated zone between the fully carbonated zone and the rebar. The pH of a fully carbonated zone is in a range of 8.0–9.5, and the pH of a semi-carbonated zone is between 9.5 and 12.1.