Chemomechanical Origin of Hydrogen Trapping at Grain Boundaries in fcc Metals.

نویسندگان

  • Xiao Zhou
  • Daniel Marchand
  • David L McDowell
  • Ting Zhu
  • Jun Song
چکیده

Hydrogen embrittlement of metals is widely observed, but its atomistic origins remain little understood and much debated. Combining a unique identification of interstitial sites through polyhedral tessellation and first-principles calculations, we study hydrogen adsorption at grain boundaries in a variety of face-centered cubic metals of Ni, Cu, γ-Fe, and Pd. We discover the chemomechanical origin of the variation of adsorption energetics for interstitial hydrogen at grain boundaries. A general chemomechanical formula is established to provide accurate assessments of hydrogen trapping and segregation energetics at grain boundaries, and it also offers direct explanations for certain experimental observations. The present study deepens our mechanistic understanding of the role of grain boundaries in hydrogen embrittlement and points to a viable path towards predictive microstructure engineering against hydrogen embrittlement in structural metals.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hydrogen embrittlement of grain boundaries in nickel: an atomistic study

The chemomechanical degradation of metals by hydrogen is widely observed, but not clearly understood at the atomic scale. Here we report an atomistic study of hydrogen embrittlement of grain boundaries in nickel. All the possible interstitial hydrogen sites at a given grain boundary are identified by a powerful geometrical approach of division of grain boundary via polyhedral packing units of a...

متن کامل

Grain size effect on deformation twinning and detwinning

This article systematically overviews the grain size effect on deformation twinning and detwinning in face-centered cubic (fcc) metals. With decreasing grain size, coarse-grained fcc metals become more difficult to deform by twinning, whereas nanocrystalline (nc) fcc metals first become easier to deform by twinning and then become more difficult, exhibiting an optimum grain size for twinning. T...

متن کامل

Yield Functions and Plastic Potentials for BCC Metals and Possibly Other Materials

Yield functions and plastic potentials are expressed in terms of the invariants of the stress tensor for polycrystalline metals and other isotropic materials. The plastic volume change data of Richmond is used to evaluate the embedded materials properties for some bcc metals and one polymer. A general form for the plastic potential is found that is intended to represent and cover a wide range o...

متن کامل

Grain boundary and surface energies of fcc metals.

Interfacial energies of five high-angle singular grain boundaries ~GB’s! in seven fcc metals—Ag, Al, Au, Cu, Ni, Pd, and Pt—are calculated employing lattice statics at 0 K using embedded-atom-method potentials. The results disagree with predictions of broken-bond models. The GB energies, however, exhibit a good linear relationship with the c44 elastic constants of these elements. This implies t...

متن کامل

Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy

Deformation twinning from grain boundaries is often observed in face-centered cubic metals with low stacking fault energy. One of the possible factors that contribute to twinning origination from grain boundaries is the intergranular interactions during deformation. Nonetheless, the influence of mechanical interaction among grains on twin evolution has not been fully understood. In spite of ext...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 116 7  شماره 

صفحات  -

تاریخ انتشار 2016