“J-Series” IPM and T-PM for EV and HEV Applications
نویسنده
چکیده
1. Introduction There is a growing demand for power semiconductors applied to motor drive inverters for electric vehicles (EVs) and hybrid electric vehicles (HEVs). Based on the results of the development and mass production of automotive power semiconductors, which require very high reliability and functionality, Mitsubishi Electric has developed the J-Series Intelligent Power Modules (IPMs) and J-Series Transfer-Molded Power Modules (T-PMs) for multipurpose automotive applications.
منابع مشابه
Inner Permanent Magnet Synchronous Machine Optimization for HEV Traction Drive Application in Order to Achieve Maximum Torque per Ampere
Recently, Inner permanent magnet (IPM) synchronous machines have been introduced as a possible traction motor in hybrid electric vehicle (HEV) and traction applications due to their unique merits. In order to achieve maximum torque per ampere (MTPA), optimization of the motor geometry parameters is necessary. This paper Presents a design method to achieve minimum volume, MTPA and minimum ...
متن کاملAutomotive electric motors, generators, and actuator drive systems with reduced or no permanent magnets and innovative design concepts [Special section intro.]
The Theme: Due to environmental and energy concerns, electric vehicles (EVs) and hybrid electric vehicles (HEVs) are gaining increased attention. At the heart of the drive system of these vehicles is the electric machine and drive. For these applications, high power density, high torque density, wide speed range, and efficiency are of primary importance. To meet these demands, interior permanen...
متن کاملDC-AC Cascaded H-Bridge Multilevel Boost Inverter with No Inductors for Electric/Hybrid Electric Vehicle Applications
This paper presents a cascaded H-bridge multilevel boost inverter for electric vehicle (EV) and hybrid EV (HEV) applications implemented without the use of inductors. Currently available power inverter systems for HEVs use a dc–dc boost converter to boost the battery voltage for a traditional three-phase inverter. The present HEV traction drive inverters have low power density, are expensive, a...
متن کاملMultilevel Inverters for Electric Vehicle Applications
This paper presents multilevel inverters as an application for all-electric vehicle (EV) and hybrid-electric vehicle (HEV) motor drives. Diode-clamped inverters and cascaded H-bridge inverters, (1) can generate near-sinusoidal voltages with only fundamental frequency switching; (2) have almost no electromagnetic interference (EMI) and commonmode voltage; and (3) make an EV more accessible/saf...
متن کاملEvaluation of soft switching for EV and HEV motor drives
Soft switching has the potential of reducing switch stresses and of lowering the switching losses as compared to hard switching. For this reason, several soft-switching topologies have been presented in the literature. Each topology has some advantages. Their operation, however, requires additional active and/or passive elements. This introduces additional cost and complexity. To understand the...
متن کامل