Inverting amplitude and phase to reconstruct tip-sample interaction forces in tapping mode atomic force microscopy.
نویسندگان
چکیده
Quantifying the tip-sample interaction forces in amplitude-modulated atomic force microscopy (AM-AFM) has been an elusive yet important goal in nanoscale imaging, manipulation and spectroscopy using the AFM. In this paper we present a general theory for the reconstruction of tip-sample interaction forces using integral equations for AM-AFM and Chebyshev polynomial expansions. This allows us to reconstruct the tip-sample interactions using standard amplitude and phase versus distance curves acquired in AM-AFM regardless of tip oscillation amplitude and in both the net attractive and repulsive regimes of oscillation. Systematic experiments are performed to reconstruct interaction forces on polymer samples to demonstrate the power of the theoretical approach.
منابع مشابه
Sensitivity Analysis of Frequency Response of Atomic Force Microscopy in Liquid Environment on Cantilever's Geometrical Parameters
In this paper, the non-linear dynamic response of rectangular atomic force microscopy in tapping mode is considered. The effect of cantilever’s geometrical parameters (e.g., cantilever length, width, thickness, tip length and the angle between the cantilever and the sample's surface in liquid environment has been studied by taking into account the interaction forces. Results indicate that the r...
متن کاملMechanics and Vibrations of Carbon Nanotube Atomic Force Microscopy Probes
Single and multi-walled carbon nanotubes (CNT) have been described as ideal tips for atomic force microscope (AFM) microcantilevers. They offer high spatial resolution, excellent wear resistance, the ability to image high aspect ratio semiconductor trenches, and possess a low bending stiffness which allows imaging of soft biomolecules with reduced contact forces. The objective of the current re...
متن کاملDynamic proportional-integral-differential controller for high-speed atomic force microscopy
In tapping mode atomic force microscopy, the cantilever tip intermittently taps the sample as the tip scans over the surface. This mode is suitable for imaging fragile samples such as biological macromolecules, because vertical oscillation of the cantilever reduces lateral forces between the tip and sample. However, the tapping force vertical force is not necessarily weak enough for delicate sa...
متن کاملCantilevers with integrated sensor for time-resolved force measurement in tapping-mode atomic force microscopy
We present a micromachined cantilever with an integrated high-bandwidth resonator for direct measurement of tip-sample interaction forces in tapping-mode atomic force microscopy. Force measurements are achieved by a diffraction grating that serves as a differential displacement sensor for the tip motion relative to the cantilever body. Time-resolved tip-sample interaction force measurement is d...
متن کاملPhase imaging and stiffness in tapping-mode atomic force microscopy
The dependence of phase angles in tapping-mode atomic force microscopy on the magnitude of tip-sample repulsive interactions was investigated, and phase images of several hard and soft samples were recorded as a function of the free amplitude Ao and the set-point tapping amplitude Asp. The phase angle of probe oscillation increases with decreasing the set-point amplitude ratio Asp/Ao. Phase ima...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nanotechnology
دوره 19 37 شماره
صفحات -
تاریخ انتشار 2008