Influence of Confining Pressure on the Crack Growth Behavior in a Highly Filled Elastomer
نویسندگان
چکیده
In this study, the effect of confining pressure on the crack growth behavior in a highly filled elastomer was investigated. The material under investigation contains 86% by weight of hard particles embedded in a rubbery matrix. The specimens were tested at a constant strain rate under a confining pressure. Two confining pressures, 3.45 MPa and 6.9 MPa, and two types of loading, monotonically increasing and cyclic, were considered. The experimental data were analyzed, and the effects of confining pressure on the damage process as well as the constitutive and crack growth behavior in the material are discussed. DOI: 10.1115/1.2189874
منابع مشابه
Nonlinear Characterizing of the Crack Growth Behavior in a Filled Elastomer
In this study, the crack growth behavior in a filled elastomer, containing hard particles embedded in a rubbery matrix, was investigated. The specimen was tested at a constant strain rate of 0.067 cm/cm/min at room temperature. Two initial crack lengths, 2.54 mm and 12.7 mm, were considered. A hybrid experimental-numerical method was used to calculate the Jintegral value. They also revealed tha...
متن کاملPredicting the Crack Growth Behavior in a Filled Elastomer
In this study, single-edge cracked uniaxial specimens with an initial crack length of 0.1 in or 0.3 in and wedge-shaped sheet specimens with an initial crack length of 0.3 in were tested at a constant displacement rate of 50 in/min under 1000 psi confining pressure. The specimens were made of a highly filled polymeric material, containing 86% by weight of hard particles embedded in a rubbery ma...
متن کاملEffects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone)
The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...
متن کاملInfluence of waste tire chips on steady state behavior of sand
Materials such as waste tire chips were widely used to improve the strength of soil. The objective of this study is to discuss the residual strength or steady-state behavior of sand-waste tire chip mixtures. A series of undrained monotonic triaxial compression tests were conducted on reconstituted saturated specimens of sand and sand-tire chip mixtures with variation in the tire-chip contents f...
متن کاملDeformational Characteristics of Rocks Containing a Single Discontinuity (TECHNICAL NOTE)
For the purpose of exploring deformation characteristics of jointed rock masses, influence of joint inclination and confining pressure on the mechanical behavior of discontinuous rock a series of compression tests were conducted under satisfactory testing conditions on three types of sandstone from various locations. Three groups of jointed specimens were used in this research, including specim...
متن کامل