A Novel Sub-1 Volt Bandgap Reference with all CMOS
نویسنده
چکیده
This paper deals with the design of novel sub-1-V bandgap reference circuit using only MOS transistors in 0.18 μm CMOS technology, for a supply voltage of 1.8V. The circuit produces a voltage reference of 466.5 mV at 27C with a temperature coefficient of 28.4 ppm/C in the range of -20 to +120C. The power supply rejection of circuit is -30 dB at 8 KHz and this rejection further increase to -50 dB at 10 KHz. Power dissipation is 3.98 uW. The circuit is also tested at four process corners. Circuit is simulated with Eldo SPICE. Key-Words: CMOS, bandgap, subthreshold, temperature coefficient, and process corner
منابع مشابه
REFERENCE VOLTAGE DRIVER FOR LOW-VOLTAGE CMOS A m CONVERTERS
A circuit for generating reference voltages for an A D converter is presented. The circuit consisting of a bandgap reference and a driver circuit is capable of operating on sub 1-volt supply voltages. The circuit is designed using a standard 0.5 p m CMOS technology. Simulations show maximum 0.24% variation in the generated reference voltage over a temperature range from -20 "C to I00"C and a su...
متن کاملReference Voltage Driver for Low-voltage Cmos A/d Converters
A circuit for generating reference voltages for an A/D converter is presented. The circuit consisting of a bandgap reference and a driver circuit is capable of operating on sub 1-volt supply voltages. The circuit is designed using a standard 0.5 m CMOS technology. Simulations show maximum 0.24% variation in the generated reference voltage over a temperature range from -20 C to 100C and a supply...
متن کاملSub 1 V CMOS bandgap reference design techniques: a survey
This paper presents a review of constraints, limitation factors and challenges to implement sub 1 V CMOS bandgap voltage reference (BVR) circuits in today’s and future submicron technology. Moreover, we provide insight analysis of BVR circuit architectures a designer can relay upon when building CMOS voltage reference.
متن کاملLow Offset, High PSRR, CMOS Bandgap Voltage Reference
A CMOS Bandgap Voltage Reference (BVR) with the characteristics of low offset and high power-supply rejection ratio (PSRR) is presented. In order to reduce the effect of offset of operation amplifier (OPA), the voltage difference of base-emitter junctions of substrate bipolar transistors is maximized; meanwhile the factor of offset voltage could be minimized. The feedback loop constructed by pr...
متن کاملCMOS Bandgap Voltage Reference With 1.8-V Power Supply
To overcome the limitation of the silicon energy gap in electron volts 1.2V wluch leads to tllat the voltage reference is fixed at about 1.2V. a design of current-mode (CM) architecture CMOS bandgap voltage reference with afiitnry voltage value by setting tlie resistor value is presented liere with Ion 1.8-V power supply. Tlie siniiilation results indicate a temperature coefficient (TC) of jppm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008