Integration of Spin-Coated Nanoparticulate-Based La0.6Sr0.4CoO3–d Cathodes into Micro-Solid Oxide Fuel Cell Membranes
نویسندگان
چکیده
A. Evans*, C. Benel, A. J. Darbandi, H. Hahn, J. Martynczuk, L. J. Gauckler, M. Prestat 1 Nonmetallic Inorganic Materials, ETH Zurich, Wolfgang-Pauli-Strasse 10, CH-8093 Zurich, Switzerland 2 Institute of Nanotechnology, Karlsruhe Institute of Technology, Karlsruhe, Germany 3 Joint Research Laboratory Nanomaterials/Technische Universität Darmstadt and Karlsruhe Institute of Technology, Darmstadt, Germany 4 Center for Functional Nanostructures, Karlsruhe Institute of Technology, Karlsruhe, Germany
منابع مشابه
The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type o...
متن کاملThe Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type of gr...
متن کاملInvestigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application
In present research work, homogeneous anion exchange membranes based on polysulfone (QAPSFs) were prepared via chloromethylation, amination and alkalization. In amination step, trimethylamine and N,N,N',N'-tetramethyl-1,6-hexanediamine were used as amination and crosslinking agents, respectively. The chloromethylated polysulfone was characterized by 1HNMR spectroscopy and chloromethylation degr...
متن کاملPolysulfone-based Anion Exchange Membranes for Potential Application in Solid Alkaline Fuel Cells
In present research work, anion exchange membranes based on quaternized polysulfone with ammonium cation moieties (QAPSF) were prepared by chloromethylation, amination and alkalization. The chloromethylated polysulfone were characterized by 1HNMR spectroscopy and functionalization degree was determined according to peak area integration. Ion transport properties (ionic conductivity, ion exchang...
متن کاملElectrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects
In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...
متن کامل