Finite element analysis of membrane wrinkling
نویسندگان
چکیده
New results are presented for the nite element analysis of wrinkling in curved elastic membranes undergoing large deformation. Concise continuum level governing equations are derived in which singularities are eliminated. A simple and e cient algorithm with robust convergence properties is established to nd the real strain and stress of the wrinkled membrane for Hookean materials. The continuum theory is implemented into a nite element code. Explicit formulas for the internal forces and the tangent sti ness matrix are derived. Numerical examples are presented that demonstrate the e ectiveness of the new theory for predicting wrinkling in membranes undergoing large deformation. Copyright ? 2001 John Wiley & Sons, Ltd.
منابع مشابه
Wrinkling of Tympanic Membrane Under Unbalanced Pressure.
Mechanics of tympanic membrane (TM) is crucial for investigating the acoustic transmission through the ear. In this study, we studied the wrinkling behavior of tympanic membrane when it is exposed to mismatched air pressure between the ambient and the middle ear. The Rayleigh-Ritz method is adopted to analyze the critical wrinkling pressure and the fundamental eigenmode. An approximate analytic...
متن کاملWrinkling Simulation of Membrane Structures under Tensile and Shear Loading
This paper presents a detailed Finite Element Analysis study of the formation and evolution of wrinkle pattern that observed in stretched thin membranes. The model problem is set up under the various load conditions. As a precondition for wrinkling, development of compressive stresses in the transverse direction is found to depend on both the length-to-width aspect ratio & thickness of the rect...
متن کاملAnalysis of pressure distribution and optimization of working conditions during push bending of circular tubes
Thin-walled tube bending is still to be considered a new and advanced technique. The process has been adopted into several industries such as aero and automotive. This process may produce a wrinkling, bulking and tearing phenomenon if the process parameters are inappropriate, especially for tubes with large diameter and thin wall thickness. Push bending process is one of the methods used for be...
متن کاملساخت ماکرو با هدف رهگیری دو پدیده چروکیدگی و ترکیدگی در فرآیند هیدروفرمینگ لوله
Determination of the optimum loading path (internal pressure- axial feeding) to restrict the Bursting, buckling and wrinkling through tube hydroforming process is necessary to produce an acceptable tube. In this paper, the wrinkling and fracture criteria are implemented to an finite element code devoted to the simulation of tube hydroforming processes. Using the ANSYS parametric design language...
متن کاملUsing the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets
The effects of input parameters on the square-cup deep-drawing process for a two-layer aluminum/steel laminated sheet were investigated. Each layer was 0.7 mm thick, and the input parameters covered in the investigation were punch nose radius (PR), die shoulder radius (DR), the clearance between a punch and die (CPD), blank holder force (BHF), and layer arrangement (LA). The effects of the inpu...
متن کامل