A CW Gunn Diode Switching Element

نویسندگان

  • J. Rosenbaum
  • F. J. Rosenbaum
  • M. Hurtado
چکیده

A current controlled bistable switching element using a CW Gunn diode is reported. With modest circuits switching rates of the order of 10 MHz have been obtained. Switching is initiated by current pulses of short duration (5 10 ns). Rise times of the order of several nanoseconds could be obtained. The apparent mechanism which allows the bistable operation of the Gunn diode is the reduction in the mobility of the GaAs active layer due to

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Power Combiner with Gunn Diode Oscillators

Absntrct -Combiners were developed using two Gunn diodes in dielecpackaged IMPATT diodes giving 10.5-W CW output at 9.1 tric waveguide jimage line) oscillator circuits. The optimum configuration GHz. He coupled individual coaxial oscillators to a main consisted of each Gunn diode being imbedded in a separate dielectric cavity cavity from which the energy was extracted. He further I.Aas a primar...

متن کامل

Efficient Er:YAG lasers at 1645.55 nm, resonantly pumped with narrow bandwidth diode laser modules at 1532 nm, for methane detection

Eye safe laser operation at 1645.55 nm (6077 cm) of resonantly pumped Er:YAG laser systems is demonstrated in cw and Q-switched operation. High brightness diode laser modules emitting at 1532 nm have been utilized as pump sources providing an absorption efficiency of up to 96%. This leads to an overall efficiency of the Er:YAG laser of 30%. For cw operation, 9 W output power is possible at pump...

متن کامل

1450-nm high-brightness wavelength-beam combined diode laser array.

We have demonstrated wavelength beam combining of a 1450-nm diode laser array with a novel smile compensation method. We have achieved 20-W cw from a 25-element single bar with an M(2) of 1.9 (fast axis) x 10 (wavelength-beam-combined dimension).

متن کامل

Dry Etching Process in InP Gunn Device Technology Utilizing Inductively Coupled Plasma (ICP)

In this paper we report some recent progress in 77GHz InP Gunn device process development. Specifically, utilizing an advanced dry etching tool to define InP Gunn diode mesas. Unlike FeCl3-based photochemical etches, the Inductively Coupled Plasma (ICP) offers excellent sidewall anisotropy and uniformity, which provides improved process consistency to facilitate mass manufacturablity of millime...

متن کامل

A Comparative Study of Two Terminal GaN- based Gunn and IMPATT Devices as High Frequency Signal Generators

The dynamic characteristics of GaN-based Gunn and IMPATTs are reported at same operating conditions to find out the potentiality of each device to use as high frequency signal generator. The general model is developed by the author’s group considering all the physical phenomena for both the devices. It is seen that Double Drift Region IMPATTs produce better microwave power compare to Gunn diode...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008