Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
نویسندگان
چکیده
In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm². Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
منابع مشابه
Evaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network
Due to lack of theory of elasticity, estimation of ultimate torsional strength of reinforcement concrete beams is a difficult task. Therefore, the finite element methods could be applied for determination of strength of concrete beams. Furthermore, for complicated, highly nonlinear and ambiguous status, artificial neural networks are appropriate tools for prediction of behavior of such states. ...
متن کاملEvaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method
Evaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method Dr. S. Nokar *- Dr. AS. Mostafavi ** *Assistant Professor of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. **Resident of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. Abstract Background a...
متن کاملMinimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method
In most of the sheet forming processes, production of the parts with minimum thickness variation and low required force is important. In this research, minimization of the sheet thinning and forming force in the hydraulic deep drawing process has been studied. Firstly, the process is simulated using the finite element method (FEM) and simulation model is verified using the experimental results....
متن کاملModeling Static Bruising in Apple Fruits: A Comparative Study, Part II: Finite Element Approach
ABSTRACT- Mechanical damage degrades fruit quality in the chain from production to the consumption. Damage is due to static, impact and vibration loads during processes such as harvesting, transportation, sorting and bulk storage. In the present study finite element (FE) models were used to simulate the process of static bruising for apple fruits by contact of the fruit with a hard surface. Thr...
متن کاملEvaluation of chemical and biological consequences of soil sterilization methods
Sterilized soils are commonly used for the study of xenobiotic sorption and as an abiotic control in biodegradation experiments. They are also used for the chemical study of nitrogen and carbon cycle processes and the elimination of the biological factors. In this research the effects of different soil sterilization methods such as autoclaving, fumigating and exposure to ultraviolet and microwa...
متن کامل