Evaluation of the effect of ultraviolet stabilizers on the change in color of pigmented silicone elastomer: An in vitro study

AIM AND OBJECTIVE To compare and evaluate the effect of ultraviolet (UV) stabilizers (Chimassorb 81 and Uvinul 5050) on the color change of pigmented elastomer. MATERIALS AND METHODS Two pigments - Red (P112 Brilliant Red) and Yellow (P106 Yellow) and two UV stabilizers Chimassorb 81 and Uvinul 5050 were studied. A total of six groups of 10 samples each were fabricated using a combination of the above colors and stabilizers: Group A1 - Red control, Group A2 - Red + Chimassorb 81, Group A3 - Red + Uvinul 5050. Group B1 - Yellow control, Group B2 - Yellow + Chimassorb 81, Group B3 - Yellow + Uvinul 5050. All samples were subjected to ageing in an accelerated weathering chamber (Weather-Ometer). Color values L, a, and b were measured at 500 and 1000 h for all samples before and after weathering and change in color (Delta E) was calculated. RESULTS All groups showed a significant color change. At 500 h, Chimassorb 81 showed a statistically significant lesser change in both colors (red - 3.66 and yellow - 2.8) compared to their control groups (red - 5.19 and yellow - 4.9). At 1000 h, both UV stabilizers showed lesser color change (A2 - 5.49, B2 - 4.28, A3 - 7.47 and B3 - 4.09) as compared to their respective control groups (A1 - 9.57 and B1 - 5.91). Overall, the change in the color with Group A was more than Group B. CONCLUSION Addition of UV stabilizers helped the reduction of color change. Chimassorb 81 showed a greater reduction in color change in both colors consistently at 500 and 1000 h.