Crystal structures of calcium hemicarboaluminate and carbonated calcium hemicarboaluminate from synchrotron powder diffraction data.

نویسندگان

  • Tomče Runčevski
  • Robert E Dinnebier
  • Oxana V Magdysyuk
  • Herbert Pöllmann
چکیده

One of the main phases formed at the beginning of the carbonation reaction of cementitious building materials is the calcium hemicarboaluminate (abbreviated as Hc). This AFm (shorthand for hydrated calcium aluminate phases structurally related to hydrocalumite) phase was synthesized, crystallized and then studied by synchrotron X-ray powder diffraction and micro-Raman spectroscopy. At room temperature and standard experimental conditions two major cementitious phases were detected, the Hc phase (as a major phase) and carbonated calcium hemicarboaluminate (abbreviated as cHc). By increasing the temperature the Hc form transforms into cHc. The crystal structures of these important AFm phases were successfully solved and refined in the R3c space group of the trigonal crystal system. Hc has the unit-cell parameters a = 5.7757 (1) and c = 48.812 (2) Å, and cHc the unit-cell parameters a = 5.7534 (1) and c = 46.389 (1) Å. The two crystal structures are composed of positively charged main layers, [Ca(4)Al(2)(OH)(12)](2+), and negatively charged interlayers, [OH(2n)(CO(3))(1 - n)·4H(2)O](2-). The structure of the main layers is typical of the AFm family. Conversely, the interlayer region has a characteristic structure built up from water molecules and statistically distributed anions. In the interlayer, the Hc carbonate and hydroxyl anions are distributed in a 0.25:0.5 ratio, whereas the ratio of the anions in the cHc interlayers is 0.4:0.2.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Calcium Carbonate Fineness on Calcium Sulfoaluminate-Belite Cement

This study investigated the hydration characteristics and strength development of calcium sulfoaluminate-belite (CSAB) cements incorporating calcium carbonate (CC) powders with various particle size distributions and different gypsum amounts. In general, the CSAB hydration was accelerated by the CC powder, but the acceleration and resulting strength improvement were more effective with finer CC...

متن کامل

Thermal properties of CaMoO4: Lattice dynamics and synchrotron powder diffraction studies

The structure of calcium molybdate was studied by means of synchrotron based high-resolution powder diffraction methods in the temperature range 12–300 K. The scheelite structure type was confirmed for CaMoO4 in the temperature region investigated and no structural anomalies were observed. Thermal expansion coefficients extracted from the thermal dependencies of the cell sizes are found to be i...

متن کامل

Synthesis and X-Ray Diffraction Analyses of Calcium Hydroxide Nanoparticles in Aqueous Suspension

Calcium hydroxide nanoparticles in aqueous suspensions (also called nanolime) were successfully employed in Cultural Heritage conservation thanks to the ability of favoring re-adhesion of the pictorial layer on original carbonatic substrates or allowing to a better superficial cohesion and protection of treated stones. In this work, we have synthesized nanolime particles in aqueous suspension b...

متن کامل

Determining the optimal conditions for calcium titanate nanoparticles synthesized via mechanical alloying method

In this research, calcium titanate nanoparticles have been synthesized via mechanical alloying (MA). By changing the parameters of mechanical alloying, optimal conditions for synthesis of this compound was determined. For synthesis of this compound, a mixture of calcium hydroxide and titanium dioxide, rotation speed of 250 rpm and differnet ball to powder weight ratio was used. Phase investigat...

متن کامل

Effect of Temperature on Isolation and Characterization of Hydroxyapatite from Tuna (Thunnus obesus) Bone

The effect of temperature on isolation and characterization of hydroxyapatite (HAp) from tuna bone was evaluated at different temperatures ranging from 200 °C to 1200 °C. The calcined bones were characterized by thermo gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Acta crystallographica. Section B, Structural science

دوره 68 Pt 5  شماره 

صفحات  -

تاریخ انتشار 2012