Speed Multipliers Variants Used in Wind Turbines and Hydro-power Stations
نویسندگان
چکیده
ABSTRACT The paper main objective is to extend the library of planetary multipliers that can be used in wind turbines’ and hydro units’ applications, by tacking into account the conditions of obtaining higher efficiencies and smaller transmission ratios for a reduced overall dimension. The analysis is based on examples of 1 DOF planetary multiplier with one and two sun gears.
منابع مشابه
Wind resource assessment of Khuzestan province in Iran
In this research paper, a 10 minute period measured wind speed data at 10 m, 30 m, and 40 m heights are presented for one of the major provinces of Iran. Four stations in Khuzestan- Abadan, Hosseyneh, Mahshahr, and Shushtar- are analyzed to determine the potential of wind power generation in this province. From the primary evaluation and by determining mean wind speed and also the Weibull f...
متن کاملWind resource assessment of Khuzestan province in Iran
In this research paper, a 10 minute period measured wind speed data at 10 m, 30 m, and 40 m heights are presented for one of the major provinces of Iran. Four stations in Khuzestan- Abadan, Hosseyneh, Mahshahr, and Shushtar- are analyzed to determine the potential of wind power generation in this province. From the primary evaluation and by determining mean wind speed and also the Weibull f...
متن کاملDifferent Types of Pitch Angle Control Strategies Used in Wind Turbine System Applications
The most common controller in wind turbine is the blade pitch angle control in order to get the desired power. Controlling the pitch angle in wind turbines has a direct impact on the dynamic performance of the machine and fluctuations in the power systems. Due to constant changes in wind speed, the wind turbines are of nonlinear and multivariate system. The design of a controller that can ad...
متن کاملDesigning a fuzzy PI^lambda controller to control the pitch angle in wind turbines under variant speed
One of the main tasks of the control systems in the wind turbines is to maintain the power of the wind when its wind speed proceed its nominal value. Because the failure to maintain the power in its nominal value in the region of the turbine curve damages the turbine and increases the mechanical stress. This object is obtained by controlling the pitch angle in the third region of the turbine cu...
متن کاملImprove dynamic performance of fixed speed wind turbines using unified power flow controller (UPFC) and fractional order controller (FOC)
Wind powers are very unstable in voltage fluctuations, especially in short circuit error and sharp and sudden voltage drops, which one of its main reasons is the use of induction generators in these power plants and thus need to reactive power and high magnetizing current. To improve the ride_through voltage from WECS in error conditions and damping the oscillations of the induction generator r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007