In vivo horizontal bending moments on implants.

نویسنده

  • E J Richter
چکیده

To date, transverse and vertical forces applied eccentrically to the axis of dental implants in the molar area during oral function have not been quantified. A specially designed load cell placed directly in the implant allowed for measurements of bending moments. Results of both load directions were compared to each other and to the loads applied vertically along the implant axis. The stress in the bone-implant interface area caused by these three different types of loads was calculated by finite element analysis. The transverse loads during chewing resulted in the highest bending moments (170 Nmm mean maximum) and the highest stress in the bone (sigma max approximately 6.2 MPa) at the crest to the buccal side. Mesial implant moment was significantly less (52 Nmm mean maximum moment; sigma max approximately 1.3 MPa). Clenching in centric occlusion caused a bending moment either to the lingual or to the buccal side, depending on the occlusal contour (140 Nmm maximum).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Bending moments and types of failure of zirconia and titanium abutments with internal implant-abutment connections: a laboratory study.

PURPOSE The aim of this study was to examine the bending moments and fracture patterns of different zirconia abutments with internal implant-abutment connections after static loading and to compare their bending moments to those of internally connected titanium abutments. MATERIALS AND METHODS Three types of customized zirconia abutments (Straumann CARES abutments/Straumann BL implants [T1], ...

متن کامل

Bending moments of zirconia and titanium implant abutments supporting all-ceramic crowns after aging.

OBJECTIVES To test the fracture load and fracture patterns of zirconia abutments restored with all-ceramic crowns after fatigue loading, exhibiting internal and external implant-abutment connections as compared to restored and internally fixed titanium abutments. MATERIALS AND METHODS A master abutment was used for the customization of 5 groups of zirconia abutments to a similar shape (test)....

متن کامل

Axial forces and bending moments in the loaded rabbit tibia in vivo

BACKGROUND Different animal models are used as fracture models in orthopaedic research prior to implant use in humans, although biomechanical forces can differ to a great extend between species due to variable anatomic conditions, particularly with regard to the gait. The rabbit is an often used fracture model, but biomechanical data are very rare. The objective of the present study was to meas...

متن کامل

The effects of lifting speed on the peak external forward bending, lateral bending, and twisting spine moments.

Lifting tasks that involve twisting have been repeatedly implicated as contributing to the onset of occupational back injuries in epidemiological studies. The objective of this work was to quantify the three directional external moments acting on the spine during a sagittally symmetric and two asymmetric lifting tasks. A total of 15 subjects participated in the three lifting tasks. All tasks we...

متن کامل

Effect of the number of abutments on biomechanics of Branemark prosthesis with straight and tilted distal implants

OBJECTIVE This study aimed to evaluate the bending moments, and compressive and tensile forces in implant-supported prostheses with three, four or five abutments. MATERIAL AND METHODS Ten Pd-Ag frameworks were tested over two master models with: 1) parallel vertical implants, and 2) tilted distal implants. Strain gauges were fixed on the abutments of each master model to measure the deformati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The International journal of oral & maxillofacial implants

دوره 13 2  شماره 

صفحات  -

تاریخ انتشار 1998