Sensorless Permanent Magnet Drive Design
نویسندگان
چکیده
The development procedure of permanent magnet drives for sensor less operation beginning from standstill under overload conditions has to consider different design aspects coevally. First, the robust rotor position sensing by test signal enforces a design with a strongly different behavior of the spatial dq-oriented differential inductance values. Therefore, the interior rotor magnet array arrangement is from principle predestinated for the controlled sensor less mode including standstill. Fortunately, in order to reduce costs, the distinct reluctance torque capability of such interior magnet arrangement is additionally used for a significantly increased torque by applying a pre-oriented stator current space vectors within the quasi-steady control.
منابع مشابه
Tuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive
In this paper, a novel method based on a combination of Extended Kalman Filter (EKF) with Self-adaptive Differential Evolution (SaDE) algorithm to estimate rotor position, speed and machine states for a Permanent Magnet Synchronous Motor (PMSM) is proposed. In the proposed method, as a first step SaDE algorithm is used to tune the noise covariance matrices of state noise and measurement noise i...
متن کاملDigital Control of Permanent Magnet Synchronous Motors
Permanent Magnet Synchronous Motor (PMSM) variable-speed drive is widely used in the industry because of its particularly high mechanical power density, simplicity and cost effectiveness. Eliminating the mechanical sensor mounted on the shaft of the motors gives further improvement. These drives are referred to as “sensorless” electrical drives. In this paper a novel sensorless algorithm is pro...
متن کاملSensorless PM Motor with Multi Degree of Freedom Fuzzy Control
This paper introduces application of multi degree of freedom fuzzy(MDOFF) controller in permanent magnet (PM)drive system. The drive system model is developed for FO control. Simulation of the system is carried out to predict the performance at NL and under load,. The results indicate that application of MDOFF controller is effective for sensorless PM drive system. Keywords—Sensorless FO contro...
متن کاملAn Adaptive Nonlinear Controller for Speed Sensorless PMSM Taking the Iron Loss Resistance into Account (RESEARCH NOTE)
In this paper, an adaptive nonlinear controller is designed for rotor Surface Permanent Magnet Synchronous Motor (SPMSM) drive on the basis of Input-Output Feedback Control (IOFC), and Recursive Least Square (RLS) method. The RLS estimator detects the motor electromechanical parameters, including the motor iron loss resistance online. Moreover, a Sliding-Mode (SM) observer is developed for onli...
متن کاملA Sensorless Initial Rotor Position Estimation Scheme for a Vector Controlled IPMSM Drive
Vector field oriented control (VFOC) of permanent magnet synchronous motor (PMSM) drive requires accurate velocity information sensed by a speed or position sensor attached to the rotor. Nowadays, sensorless control is adopted in many industrial applications for reasons of robustness, cost, cabling and reliability. This paper presents a novel sensorless control strategy and initial rotor positi...
متن کاملAdaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Tracking control of the direct-drive robot manipulators in high-speed is a challenging problem. The Coriolis and centrifugal torques become dominant in the high-speed motion control. The dynamical model of the robotic system including the robot manipulator and actuators is highly nonlinear, heavily coupled, uncertain and computationally extensive in non-companion form. In order to overcome thes...
متن کامل