Deformability of a Textile Reinforcement Modified with Nanofibres
نویسندگان
چکیده
Deformability of a textile fabric is studied experimentally using a) friction test, b) out-of-plane compression, and c) bending. These tests reveal that a grafting of the fabric with carbon nano-fibres can significantly deteriorate its deformability. Therefore an optimal CNF mass fraction should be chosen for a particular production case, to obtain a compromise between improved strength and decreased drapability.
منابع مشابه
Using A Range of PVB Spinning Solution to Acquire Diverse Morphology for Electrospun Nanofibres
Morphological changes in Polyvinyl Butyral (PVB) electrospun nanofibres can be acquired by preparation of PVB spinning solution in different solvents. Accordingly, three solvents, including ethyl alcohol, n-butanol and isopropanol, with diverse physical properties (e.g. boiling point, density, dipole moment and dielectric constant) were used to prepare PolyVinyl Butyral (PVB) spin...
متن کاملPoly (Lactic Acid)Nanofibres as Drug Delivery Systems: Opportunities and Challenges
Numerous Scientists have discovered the procedure of nanotechnology, explicitlynanofibers, asdrug delivery systems for transdermal uses. Nanofibers canbe used to deliver drugs and are capable of controlled release for a continued periodof time. Poly (Lactic Acid) (PLA) is the lastly interesting employed synthetic polymer in biomedical application owing to its well categorized biodegradable prop...
متن کاملOPTIMAL DESIGN OF COLUMNS FOR AN INTERMEDIATE MOMENT FRAME UNDER UNIAXIAL MOMENT AND AXIAL LOADS
The present study addresses optimal design of reinforced concrete (RC) columns based on equivalent equations considering deformability regulations of ACI318-14 under axial force and uniaxial bending moment. This study contrary to common approaches working with trial and error approach in design, at first presents an exact solution for intensity of longitudinal reinforcement in column section by...
متن کاملCure Characteristics and Physico-mechanical Properties of the Stearic Acid Surface of Modified Calcium Carbonate Reinforcement NR/SBR Compounds
Calcium carbonate is a cheap and readily available filler used in rubber industry. This material is not compatible with rubber matrix, so many researchers have tried to modify its surface with various materials in order to increase its hydrophobicity and improve compatibility with the rubber matrix. In this effort, surface modification of calcium carbonate was carried out by 1.5%, 3% and 4% ste...
متن کاملFibre Distribution inside Yarns of Textile Composite: Geometrical and Fe Modelling
This article addresses the experimental investigation and modelling of the uneven fibre distribution inside yarns of a textile composite. The test data is given for the tri-axial carbon-fibre braid; a considerable irregularity is revealed for the fibre distribution along and across the yarns. The importance of this effect for the damage resistance is illustrated with a simple finite-element (FE...
متن کامل