Evaluation of a Value Prior to Pulping-thermomechanical pulp business concept: Part 2

نویسنده

  • PETER INCE
چکیده

Value Prior to Pulping (VPP) is a novel biorefining concept for pulp mills that includes hydrolysis extraction of hemicellulose wood sugars and acetic acid from pulpwood prior to pulping. The concept involves conversion of wood sugars via fermentation to fuel ethanol or other chemicals and the use of remaining solid wood material in the pulping process. This paper provides an overview of the methods and results from analysis of the concept as a hypothetical business investment at a pulp and paper mill equipped for making thermomechanical pulp (TMP). Application: Traditional pulp and paper manufacturing may benefit from process synergies by integrating new biorefining concepts. 1. Block diagram of the base-case thermomechanical pulp (TMP) and paper process. BIOREFINERY – ECONOMICS 32 TAPPI JOURNAL | MAY 2011 mers is subsequently hydrolyzed, neutralized, and fermented to ethanol. Acetic acid is also produced as a byproduct of the extraction process. As shown in Fig. 2, the VPP–TMP process model also incorporates the TMP process shown in Fig. 1; however, with the introduction of VPP, operating parameters of the TMP may require adjustment. For example, VPP chip pretreatment results in reduced energy requirements in TMP refining, with a corresponding increase in TMP throughput. Pulp quality may improve, thereby reducing the quantity of purchased kraft or groundwood supplemental pulps. VPP–TMP scenarios We modeled four hypothetical scenarios to assess the feasibility of VPP–TMP in the context of a modeled lightweight coated (LWC) paper mill. Our four VPP–TMP scenarios reflect use of alternative pulpwood species in the TMP process (aspen, spruce, or pine) and also variation in OA pretreatment level for pine. Our four scenarios are labeled as follows: (1) aspen, (2) spruce, (3) pine low OA, and (4) pine high OA. Table I displays values of key process inputs and outputs per day for the base case (without VPP) and the four alternative VPP–TMP scenarios. TMP refiner electric energy input and LWC paper production were held constant in all scenarios relative to the base case, so as to isolate from our analysis the effects of variation in those parameters and focus instead 2. Block diagram of the Value Prior Pulping (VPP)–TMP process concept with hemicellulose extraction and fermentation to ethanol. Base Case Alternative VPP–TMP Scenarios Aspen Spruce Pine Low OA Pine High OA

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of the Luffa Cylindrica, Part II: Pulp Elaboration and Paper Characterization

This study was devoted to the development of pulp Luffa Cclindrica and its characterization paper (annual plant fiber of the family Cucurbitaceae). Baking at soda helps to achieve a high level of delignification (Kappa ≤ 10) and high yield (≈ 67%).The beatability stack Valley is comparable to refined wood fibers, the fibers develop a normally time with good hydrophilic pro...

متن کامل

Thermomechanical Pulping of Loblolly Pine Juvenile Wood

Intensive forest management, with a heavy emphasis on ecosystem management and restoring or maintaining forest health, will result in the removal of smaller diameter materials from the forest. This increases the probability of higher juvenile wood content in the harvested materials. The purpose of this study was to compare the performance of loblolly pine juvenile and mature wood unbleached the...

متن کامل

A larch biorefinery producing pulp and lactic acid

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Hanna Hörhammer Name of the doctoral dissertation A larch biorefinery producing pulp and lactic acid Publisher School of Chemical Technology Unit Department of Forest Products Technology Series Aalto University publication series DOCTORAL DISSERTATIONS 143/2014 Field of research Biorefineries Manuscript submitted 6 June 2014 D...

متن کامل

Basics of Paper Manufacturing

Oklahoma Cooperative Extension Service • Division of Agricultural Sciences and Natural Resources Paper is a thin sheet usually manufactured from cellulose pulp derived from wood and other lignocellulosic materials such as cotton, rice or wheat straw for writing, printing and packaging purposes. Some of the important production processes and properties of different kind of papers will be reviewe...

متن کامل

Multifunctional Alkaline Pulping, Delignification and Hemicellulose Extraction

In this study, multifunctional alkaline pulping was suggested to produce different pulp grades at one mill site, ranging from high-yield paper pulp to high-purity dissolving pulp. In all process modifications, sulfur was successfully replaced by anthraquinone. Autohydrolysis and alkaline pre-extraction were applied to Eucalyptus globulus wood chips, followed by kraft and soda-AQ pulping. Alkali...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011