When the Lights Go Out: LED Failure Modes and Mechanisms
ثبت نشده
چکیده
منابع مشابه
An Investigation into the Pull-out Failure Mechanisms of Suction Caissons
This paper reports results from an investigation into the suction caissons failure mechanisms under vertical pull-out loads. An insight to the failure mechanisms of suction caissons paves the path for developing analytical solutions to their pull-out capacity. The numerical models of suction caissons have first been calibrated by and verified against several experimental data from other researc...
متن کاملStudy on the strengthening mechanisms and failure modes of the ultra-fine grained tri-modal Al5083-5wt. %B4C-Al2024 and Al5083-5 wt. %B4C-Al5083 composites
In this paper, the influence of Al2024 and Al5083 aluminum alloy coarse grains on mechanical properties and fracture mechanism of Al5083-B4C tri-modal composite has been discussed. Al5083 alloy powders with 5 wt. % of boron carbide were milled for 36 hours and 25 and 50 wt. % of coarse grain (CG) Al2024 and Al5083 powders were added to the milled powders and then hot press under argon atmospher...
متن کاملReliability Analysis of K-Out-Of N: G Machining Systems with Mixed Spares and Multiple Modes of Failure (TECHNICAL NOTE)
This paper deals with the transient analysis of K-out-of-N: G system consisting of Noperatingmachines. To improve system reliability, Y cold standby and S warm standbys spares areprovided to replace the failed machines. The machines are assumed to fail in multiple modes. At leastK-out-of-N machines for smooth functioning of the system. Reliability and mean time to failure areestablished in term...
متن کاملComparison of the Effect of Three LED Light Modes and Conventional QTH Curing Light on Shear Bond Strength of Composite to Dentin
Objective: Shear bond strength is an important property inherent to the durability of tooth-colored restorative materials namely composite resins. It has been years that halogen light sources have been used for polymerization of composite resins. In recent years Light Emitting Diodes (LED) have been introduced for this purpose. With respect to their longer bulb life, needless of a filter and ...
متن کاملبررسی تجربی ضربه بالستیک گلوله سرتخت بر پنل‌های GLARE 2/1(علمی-پژوهشی)
An experimental study of the high velocity impact on 2/1 GLARE panels has been carried out. Four GLARE 3 panels with (Al/0/90/Al), (Al/02/902/Al), (Al/04/904/Al) and (Al/08/908/Al) configurations were fabricated. All panels had same aluminum thickness. Ballistic tests were conducted using flat ended steel projectiles. The failure modes and energy absorption mechanisms were characterized by obse...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007