Statistical Pre-processing and Reconstruction Methods for Subsurface Hydro-meteorological and Crack Aperture Time Series
نویسندگان
چکیده
This paper focuses on statistical methods for pre-processing, reconstructing and/or synthesizing hydro-meteorological time series and shrinkage crack aperture signals collected in the galleries of an Underground Research Laboratory in clay rock (Tournemire, France).
منابع مشابه
Improving the quality of ultrasound images using Bayesian estimators
Medical ultrasound imaging due to close behavior of cancer tumors to body tissues has a low contrast. This problem with synthetic aperture imaging method has been addressed. Although the synthetic aperture imaging technique solved the low-contrast problem of ultrasound images, to an acceptable limit, but the performance of these methods is not even acceptable when the signal to noise ratio (SNR...
متن کاملComparison of physical and statistical methods for estimating probable maximum precipitation in southwestern basins of Iran
The probable maximum precipitation (PMP) is the greatest depth of precipitation for a given duration that is physically possible over a given size storm area at a particular geographical location at a certain time of the year. In this study a physically based method was compared with a statistical procedure to calculate PMP in the southwest arid regions of Iran. In order to estimate PMP using a...
متن کاملNonlinear multivariable analysis of SOI and local precipitation and temperature
Global climate variability affects important local hydro-meteorological variables like precipitation and temperature. The Southern Oscillation (SO) is an easily quantifiable major driving force that gives impact on regional and local climate. The relationships between SO and local climate variation are, however, characterized by strongly nonlinear processes. Due to this, teleconnections between...
متن کاملPredicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...
متن کاملQuantifying the Fracture Mechanics Properties of Rock for Fractured Reservoir Characterization
Natural fractures are important conduits for fluid-flow and can control the deformational behavior of rock. The accurate evaluation of natural fracture geometry in the subsurface is difficult because of the sampling problems inherent to wellbores and indirect investigation methods such as seismic. Because of these limitations in observational capability, predictive models are needed to provide ...
متن کامل