An Improvement of RINEX-Shift Algorithm for Continuous GPS Carrier-Phase Time Transfer
نویسنده
چکیده
The wide application of GPS carrier-phase (CP) time transfer is limited by the problem of boundary discontinuity. The RINEX-Shift (RS) algorithm was designed to solve this problem [1]. However, if there are GPS data anomalies, the time transfer result computed by this algorithm oscillates around the true value. The deviation from the true value can be as large as a few nanoseconds. The origin of this oscillation behavior lies in the fact that the precise point positioning (PPP) technique needs some time (e.g., 2 hours) to converge. If there are only a short segment (e.g., < 2 hours) of valid data before or after the missing data, PPP does not have enough time to converge so that the solution for this short segment deviates from the true value. We propose the “revised RINEX-Shift” (RRS) algorithm to solve the oscillation problem in the RS algorithm. RRS extracts the result at the middle epoch, rather than the first epoch as in the RS algorithm. In this way, PPP has enough time to converge. Tests of the RRS algorithm show that the oscillation problem is solved successfully and there is a 10–55% improvement of fractional frequency stability over the RS algorithm. Thus, the RRS algorithm provides the best GPS time transfer result.
منابع مشابه
A New Algorithm to Eliminate GPS Carrier-phase Time Transfer Boundary Discontinuity
We report on a study of the Global Positioning System (GPS) carrier-phase (CP) time transfer boundary discontinuity by the use of the precise point positioning (PPP) technique. We first demonstrate that the pseudorange measurement noise leads to the boundary discontinuity by simulation. We also find that the boundary discontinuity is reduced by 10% 30% when executing PPP with the input of the I...
متن کاملContinuous GPS
Date The final copy of this thesis has been examined by the signatories, and we find that both the content and the form meet acceptable presentation standards of scholarly work in the above mentioned discipline. Time transfer (TT) is the process of transmitting a timing signal from one place to another place. It has applications to the formation and realization of Coordinated Universal Time (UT...
متن کاملApplication of Network RTK Positions and Geometric Constraints to the Problem of Attitude Determination Using the GPS Carrier Phase Measurements
Nowadays, navigation is an unavoidable fact in military and civil aerial transportations. The Global Positioning System (GPS) is commonly used for computing the orientation or attitude of a moving platform. The relative positions of the GPS antennas are computed using the GPS code and/or phase measurements. To achieve a precise attitude determination, Carrier phase observations of GPS requiring...
متن کاملGalileo Common View: Format, Processing, and Tests with Giove
R2CGGTTS is a software program dedicated to provide clock solutions for GNSS time transfer in the standard CGGTTS (Common GPS GLONASS Time Transfer Standard) from RINEX observation files. This paper presents the upgrade of the R2CGGTTS to include observations of the future Galileo satellites; the approach is validated using the GIOVE data. A second part of the paper presents the possibilities o...
متن کاملA Study of GPS Carrier-Phase Time Transfer Noise Based on NIST GPS Receivers
To do a better time comparison between high-precision clocks (such as a Cesium-fountain clock and Hydrogen-maser clock), we want to study and eventually lower the GPS carrier-phase time transfer noise. The GPS carrier-phase time transfer noise comes from four sources: GPS satellite, GPS signal path, ground receiving equipment (receiver and antenna), and data-processing algorithm. This paper foc...
متن کامل