hemp, and flax composites

نویسندگان

  • Christoph Buksnowitz
  • Ramesh Adusumalli
  • Andreas Pahler
  • Herbert Sixta
  • Wolfgang Gindl
چکیده

This study characterizes the acoustical behavior of natural fiber composites. Regenerated cellulose fibers (Lyocell), hemp fibers, and flax fibers were embedded in an epoxy-matrix. These unidirectional composites were tested for their logarithmic damping decrement, the resonance frequency, the ultrasound velocity, the dynamic and static modulus of elasticity, and bending strength and density. Glass-epoxy composites served as a reference. All tested cellulosic fibers showed a significantly higher damping at lower densities. The ultrasound velocity was in the range of the reference for Lyocell– and hemp–fiber composites. Taking the low density into account, the dynamic and static modulus of elasticity of the samples were relatively high compared to the glass reference. The specific acoustical properties of these natural fiber composites point at high value applications, e.g., devices that require high damping of the body structures.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of Hybridizing Flax and Hemp-Agave Fibers with Glass Fiber as Reinforcement in a Polyurethane Composite

In this study, six combinations of flax, hemp, and glass fiber were investigated for a hybrid reinforcement system in a polyurethane (PU) composite. The natural fibers were combined with glass fibers in a PU composite in order to achieve a better mechanical reinforcement in the composite material. The effect of fiber hybridization in PU composites was evaluated through physical and mechanical p...

متن کامل

Effect of Fungal Deterioration on Physical and Mechanical Properties of Hemp and Flax Natural Fiber Composites

The development and application of bio-sourced composites have been gaining wide attention, yet their deterioration due to the growth of ubiquitous microorganisms during storage/manufacturing/in-service phases is still not fully understood for optimum material selection and design purposes. In this study, samples of non-woven flax fibers, hemp fibers, and mats made of co-mingled randomly-orient...

متن کامل

Composite Materials Based on Hemp and Flax for Low-Energy Buildings

The article presents the results obtained in the course of a study on prospective application of flax/hemp wastes as a filling material of lime-based composites in the construction of low-energy buildings. The utilized filler comprised the hydrated lime with clay and Portland cement used as additives. The analysis involved evaluation of such properties as porosity, density, thermal conductivity...

متن کامل

Impact Resistance of All-polypropylene Composites Composed of Alpha and Beta Modifications

The development of environmental friendly engineering material has received top priority recently. Glass fiber (GF) reinforced polypropylene (PP) composites is one of the most widely used materials in the automotive industry due to its favourable properties. However, the presence of GF has become a major issue in the recycling of GF/PP composites. Considerable efforts have been devoted to find ...

متن کامل

Respiratory response in simultaneous exposure to flax and hemp dust.

Zu§kin, E., and Valic, F. (1973). British Journal of Industrial Medicine, 30, 375-380. Respiratory response in simultaneous exposure to flax and hemp dust. The effect of exposure to high concentrations of mixtures of hemp and flax dust was studied in 124 workers in two textiie mills (mill A: 65-70% hemp and the rest flax, mean dust concentration 13 9 mg/m3; and mill B: about 35% hemp and the re...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010