Data on optimum recycle aggregate content in production of new structural concrete
نویسنده
چکیده
This data presented herein are the research summary of "mechanical behavior and durability performance of concrete containing recycled concrete aggregate" (Paul, 2011) [1]. The results reported in this article relate to an important parameter of optimum content of recycle concrete aggregate (RCA) in production of new concrete for both structural and non-structural applications. For the purpose of the research various types of physical, mechanical and durability tests are performed for concrete made with different percentages of RCA. Therefore, this data set can be a great help of the readers to understand the mechanism of RCA in relates to the concrete properties.
منابع مشابه
Analysis of the Modifying Effect of Styrene Butadiene Rubber Latex Copolymer on Strength and Permeability Properties of Structural Light Aggregate Concrete
Polymers not only possess repairing functions concerning the concrete structures, but also due to their properties are used in making different types of polymer cements and improving the matrix structure of cement materials, enhancing the viscosity, mechanical, and stability power of concretes. Today, there is limited knowledge on the use of SBR in structural light aggregate concrete. In the pr...
متن کاملThe possible use of Sewage Sludge Ash (SSA) in Self-Consolidating Concrete (SCC) for environmental sustainability
Nowadays, waste production is increased due to the growth of technology and excessive use of natural resources as well as production of new chemicals, among which the hazardous wastes are no exception of that stabilization and solidification method is one of the hazardous waste management methods through which the waste materials are stabilized and confined. High flexibility for various polluta...
متن کاملEvaluation of Autogenous Shrinkage in High-Performance Concrete
Recent tendencies in concrete technology have been towards to high- performance concrete with a low water-cement ratio. However, high performance concretes have some problems. One of the problems is early-age cracking due to autogenous shrinkage. This study presents the results of an experimental investigation carried out to evaluate the autogenous shrinkage of high-strength concrete. Accordi...
متن کاملInfluence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete (RESEARCH NOTE)
In this study, first by surveythe parameters affecting the compressive strength, such as water to cement ratio, cementgrade, silica fume to cement percentage, and the various ratios oflight weight aggregate LECA, to total aggregate, Taguchi method is used, to test 9 mix designsobtained the mix design optimization. Since lightweight concrete is brittle like normal concrete, to resolve this probl...
متن کاملRegression Models to Evaluate Compressive Strength of Polyethylene Terephthalate (PET) Fibre Reinforced Recycle Aggregate Concrete
-This paper presents the compressive strength of PET fibre reinforced recycles aggregate concrete. The Natural Aggregate (NC) was replaced by recycle aggregate (RA) in the proportion of 25, 50, 75 and 100%. PET fibres were added to the Recycle Aggregate Concrete (RAC) by 1 and 2% volume. Total 45 cubes were cast and tested. The results showed that as the % of RA and volume fraction of PET fibre...
متن کامل