Potential Applications for Liquid Silicon Melt Infiltrated (LSI) Composites to the High-Temperature Sulfur-Iodine (S-I) Process
نویسنده
چکیده
منابع مشابه
EFFECT OF NANO SiC ADDITIVE ON MCMB-SiC COMPOSITE FABRICATION VIA MOLTEN SILICON INFILTRATION
C-SiC composites with carbon-based mesocarbon microbeads (MCMB) preforms are new type of highpreformance and high-temperature structural materials for aerospace applications. In this study MCMB-SiC composites with high density (2.41 g.cm-3) and high bending strength (210 MPa,) was prepared by cold isostatic press of mixed mesophase carbon powder derived from mesophase pitch with different amoun...
متن کاملDevelopment of Liquid-silicon-impregnated C/c-sic Composites for High- Temperature Heat Transport a Unit Cell of an Lsi C/c-sic Plate Heat Exchanger
This report summarizes a phased research plan that has been developed under support from Sandia National Laboratory, as a part of planning efforts for nuclear hydrogen production, to investigate the use of liquid-silicon-impregnated (LSI) composites for the development of compact and inexpensive heat exchangers, piping, vessels and pumps capable of operating in the temperature range of 800 to 1...
متن کاملThe Effect of Flux type and Oxygen Blowing on Simultaneous Removal of Phosphorus and Sulfur from Molten Iron
This research was conducted to study the effect of lime based Flux with the composition of CaO-20%CaF2-8%FeO on simultaneous removal of phosphorus and Sulfur from hot metal. The effects of Na2O and oxygen blowing were also studied. The experiments were performed using an induction furnace and hot metal produced in Isfahan Steel Company in the temperature range 1350-1450 ºC...
متن کاملMelting and Processing of Silicon by Microwave Heating
Microwave heating is applied for processing different silicon raw materials, based on the size-, shapeand composition-dependent absorption of radiation of 2.45 and 916 MHz frequency by silicon. In model experiments directed towards the improvement of melting technology, Si-fines and chunks of bulk Silicon from Electronic Grade (EG)and Solar Grade (SG)-silicon production are used as raw material...
متن کاملEffect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites
The effect of SiC content, additives, and process parameters on densification and microstructural properties of pressureless sintered ZrB2– (1–10 wt %) SiC particulate composites have been studied. The ZrB2–SiC composite powders mixed by Spex mixer with 1-2wt% C (added as graphite powder) and CMC have been cold-compacted and sintered in argon environment in the temperature range of 1800–2100ºC ...
متن کامل