Influence of Non-Stoichiometry on the Structure and Properties of Ba(Zn1/3Nb2/3)O3 Microwave Dielectrics: III. Effect of the Muffling Environment

The effect of different muffling environments on the structure and dielectric losses of Ba(Zn1/3Nb2/3)O3 (BZN) microwave ceramics was investigated. The microwave dielectric losses of stoichiometric BZN pellets heated in ZnO-rich environments were severely degraded (e.g. Q×f~15 000 in ZnO powder) compared with samples muffled in their own powder (Q×f~80 000). Structure analyses and gravimetric measurements confirmed that the ceramics muffled in ZnO powder or vapor absorb excess ZnO to form non-stoichiometric solid solutions with reduced cation order and Q. By using starting compositions in the (1−x)BZN−(x)BaNb4/5O3 binary (x=0.04), the stoichiometry can be tailored to ensure that after the uptake of ZnO, the ceramics remain well ordered and are located in a high Q region of the system. For example, ZnOvapor-protected (0.96)BZN−(0.04)BaNb4/5O3 reached a very high Q×f(~1 05 000) after sintering at 1400°C for 5 h. Comments Copyright The American Ceramic Society. Reprinted from Journal of the American Ceramic Society, Volume 89, Issue 7, July 2006, pages 2264-2270. This journal article is available at ScholarlyCommons: http://repository.upenn.edu/mse_papers/116 Influence of Non-Stoichiometry on the Structure and Properties of Ba(Zn1/3Nb2/3)O3 Microwave Dielectrics: III. Effect of the Muffling Environment Hui Wu and Peter K. Davies Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6272 The effect of different muffling environments on the structure and dielectric losses of Ba(Zn1/3Nb2/3)O3 (BZN) microwave ceramics was investigated. The microwave dielectric losses of stoichiometric BZN pellets heated in ZnO-rich environments were severely degraded (e.g. Q f B15000 in ZnO powder) compared with samples muffled in their own powder (Q f B80000). Structure analyses and gravimetric measurements confirmed that the ceramics muffled in ZnO powder or vapor absorb excess ZnO to form non-stoichiometric solid solutions with reduced cation order andQ. By using starting compositions in the (1 x)BZN (x)BaNb4/5O3 binary (x5 0.04), the stoichiometry can be tailored to ensure that after the uptake of ZnO, the ceramics remain well ordered and are located in a high Q region of the system. For example, ZnO-vapor-protected (0.96)BZN (0.04)BaNb4/5O3 reached a very high Q f (B1 05 000) after sintering at 14001C for 5 h.