Development of Average Model for Control of a Full Bridge PWM DC-DC Converter
نویسندگان
چکیده
This paper presents a detailed small-signal and transient analysis of a full bridge PWM DC-DC converter designed for high voltage, high power applications using an average model. The derived model is implemented in a typical system and used to produce the small-signal and transient characteristics of the converter. Results obtained in the analysis of the high voltage and high power design example is validated by comparison for actual system and derived model. The derived small signal model is used to design a controller to regulate output voltage of the converter under several disturbances. A PD controller with combination of a feedforward input voltage is designed so that the output voltage is equal to desired voltage and the time response is very short under load and input voltage disturbances.
منابع مشابه
Development of Average Model for Control of a Full Bridge PWM DC-DC Converter
This paper presents a detailed small-signal and transient analysis of a full bridge PWM DC-DC converter designed for high voltage, high power applications using an average model. The derived model is implemented in a typical system and used to produce the small-signal and transient characteristics of the converter. Results obtained in the analysis of the high voltage and high power design examp...
متن کاملControl Strategy of Three Phase PWM by Three Half Bridge Topology Bidirectional DC/DC Converter and Resonant
This paper analyses and compares PWM control strategy of control and buffer type soft switching half bridge DC/DC converter. Finally, the soft switching condition are analyzed, and this article gets the realization of soft switching conditions of the three half bridge DC/DC converter and the influence factors of soft switching conditions of the three half bridge DC/DC converter. Characteristics...
متن کاملDSP Based Series-Parallel Connected Two Full-Bridge DC-DC Converter with Interleaving Output Current Sharing
Input-series-output-parallel (ISOP) connected DC-DC converters enable low voltage rating switches to be used in high voltage input applications. In this paper, a DSP is adopted to generate digital phase-shifted PWM signals and to fulfill the closed-loop control function for ISOP connected two full-bridge DC-DC converters. Moreover, a stable output current sharing control strategy is proposed fo...
متن کاملA Modified Phase-Shifted Pulse Width Modulation to Extend Linear Operation of Hybrid Modular Multi-level Converter
Recently, hybrid modular multi-level converters, which are configured as full and half bridge sub-modules, are developed and utilized in the wide area of applications. Compared to its non-hybrid counterpart, these converters have several advantages such as the ability to nullify the DC side fault current and controlling AC side reactive power during the faults. This paper proposes a modified ph...
متن کاملDesign of PI and Fuzzy Controller for High-Efficiency and Tightly Regulated Full Bridge DC-DC Converter
The controller is used to improve the dynamic performance of DC-DC converter by achieving a robust output voltage against load disturbances. This paper presents the performance of PI and Fuzzy controller for a phaseshifted zerovoltage switched full-bridge PWM (ZVS FBPWM) converters with a closed loop control. The proposed converter is regulated with minimum overshoot and good stability. In this...
متن کامل