Numerical Modelling to Understand Cracking Phenomena During Laser-GMA Hybrid Welding Nickel-Base Superalloys
نویسنده
چکیده
© 2012 Gao, licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Numerical Modelling to Understand Cracking Phenomena During Laser-GMA Hybrid Welding Nickel-Base Superalloys
منابع مشابه
Numerical Modeling of Heat Affected Zone Cracking Tendency during Laser and Hybrid Laser-Arc Welding Processes
A two-dimensional thermal elasto-plastic numerical model is developed by finite element method to analyze and compare the mechanical driving factor for heat affected zone (HAZ) liquation cracking during laser welding and hybrid laser-arc welding techniques. Calculations of transient temperatures and cooling rates are used in conjunction with solidification theory to analyze weld pool characteri...
متن کاملNumerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process
Amodel based on a double-ellipsoidal volumeheat source to simulate the gasmetal arcwelding (GMAW) heat input and a cylindrical volume heat source to simulate the laser beam heat input was developed to predict the temperature field and thermally induced residual stress in the hybrid laser–gas metal arc (GMA) welding process. Numerical simulation shows that higher residual stress is distributed i...
متن کاملSeam gap bridging of laser based processes for the welding of aluminium sheets for industrial applications
Laser welding has a large potential for the production of tailor welded blanks in the automotive industry, due to the low heat input and deep penetration. However, due to the small laser spot and melt pool, laser-based welding processes in general have a low tolerance for seam gaps. In this paper, five laserbased welding techniques are compared for their gap bridging capabilities: single-spot l...
متن کاملDiffusion Welding of Nickel-based Superalloys
Ni based superalloys can be welded by diffusion bonding. Temperature, diffusion coefficient, activation energy and Boltzmann constant influence the quality of diffusion bonding, so obtaining the best condition for welding is considered. Showing the suitable condition for diffusion welding of nickel-based superalloys is the aim of this paper.
متن کاملAnalysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy
The weldability of GTD-111 nickel-based superalloy by pulsed Nd:YAG laser welding with an average power of 250 W was studied, and the microstructural evolution and cracking characteristics were also investigated. The solidification cracking of the fusion zone (FZ) and the intergranular liquation cracking in the heat affected zone (HAZ) were observed in the joint. Solidification cracking was cau...
متن کامل