Pr el im in ar y Comparison of the Brushless Doubly Fed Reluctance Machine and
نویسندگان
چکیده
1.3 Torque ratio of 6/2 pole BDFRM and the 4 pole SYNCREL with the same copper losses, active copper and current angles of π/4. 13 1.4 α s and α p for maximum torque per 1.7 Maximum-torque-per-total-amperes for various torque levels.. . 19 1.8 Real and reactive powers under the maximum-torque-per-total-amperes condition with the secondary winding being supplied at the mains frequency (ω sn = 1).
منابع مشابه
Parameter and Performance Comparison of Doubly Fed Brushless Machine With Cage and Reluctance Rotors
The cage and reluctance rotors are two major types of rotor structures used in the doubly fed brushless machine (DFBM). In order to study comparatively the effects of different rotor structure on the DFBM, a prototype machine has been specially designed and built. The experimental parameter and performance comparisons between the axially laminated anisotropic (ALA) and cage-rotor machines are p...
متن کاملControl Methods for Doubly-Fed Reluctance Machines
The paper considers aspects of scalar V/f control, vector control and direct torque (and flux) control (DTC) of an emerging cost-effective technology for limited speed range applications the brushless doubly fed reluctance machine (BDFRM). Apart from giving a comprehensive review of the various control methods, its major contribution is the presentation and experimental verification of a sensor...
متن کاملBrushless Doubly-Fed Reluctance Machine Optimization using Reluctance Networks
The Brushless Doubly-Fed Reluctance Machine (BDFRM) is being considered as a viable generator alternative to be used in wind turbines. However, a literature review shows that there is still a lack of researches to define a design procedure to make this machine commercial. This paper aims to address this issue by considering a new BDFRM design method using a reluctance network approach with focu...
متن کاملPower Decoupling Control of Open-Winding Brushless Doubly- Fed Reluctance Machine for Wind Power Generator Application
A novel open-winding brushless doubly-fed reluctance machine and its power decoupling control system are proposed for wind power generator application. The control winding of brushless doubly-fed reluctance generator (BDFRG) is designed as openwinding structure, and the double-end power supply cascade two-level inverter is adopted to excite the open-winding BDFRG. This topology structure has be...
متن کاملAn Improved Three-level Direct Torque Control Method of Brushless Doubly-fed Machine Based on the Fixed Synthesizing Vector
Article history: Received: 11. 09. 2013. Received in revised form: 17.10.2013. Accepted: 17.10.2013. With the rapid growth of an AC adjusted speed system application, it is necessary to control and reduce harmonic pollution since the problem brought about by the device of power electronics not only blocks the development of power electronics technology, but also causes severe harm in an electri...
متن کامل