Comparative Study of Wood Flour Photodegradation of Two Wood Species Submitted to Artificial Weathering
نویسنده
چکیده
In this work Eucalyptus grandis and Dipteryx odorata were submitted to photodegradation by ultraviolet radiation. The effect of ultraviolet radiation irradiation on the color change and chemical composition of each wood flour were evaluated. The samples were submitted to a total of 500h of artificial weathering using condensation stages and ultraviolet radiation B irradiation cycles. The changes in wood flour color were monitored by spectrocolorimetry, while the changes in wood chemical composition were evaluated by Fourier transform infrared spectroscopy. Both species showed changes in color with increased exposure time to artificial weathering. For both wood species the variation in color change was considered very appreciable after 500h. The Eucalyptus grandis specie showed appreciable color change after 120h, while for Dipteryx odorata specie the color change is appreciable only after 240h. The Fourier transform infrared spectroscopy results showed that lignin was strongly degrades by ultraviolet radiation radiation in both species. However, Dipteryx odorata was more resistant to photodegradation than Eucalyptus grandis, probably due to lower lignin content in this wood. The results clearly indicated that for the wood species studied the rate of weathering is influenced by wood species.
منابع مشابه
Effect of Artificial Weathering on the Properties of Industrial-Scale Thermally Modified Wood
Thermally modified wood is widely used in cladding, decking, and other construction projects that are meant for outdoor exposure. The purpose of this study was to investigate changes in the color, microstructure, and chemical composition of heat-treated, Larix spp. wood that was exposed to artificial weathering. In this study, accelerated weathering tests (UV and moisture) were conducted over a...
متن کاملWeathering Characteristics of Wood Plastic Composites Reinforced with Extracted or Delignified Wood Flour
This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial weathering under accelerated c...
متن کاملStiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function
One of the most famous methods to predict the stiffness of short fiber composites is micromechanical modeling. In this study, a Representative Volume Element (RVE) of a beech wood flour natural composite has been designed and the orientation averaging approach has been utilized to predict its stiffness tensor. The novelty of this work is in finding the proper fiber orientation distribution func...
متن کاملA novel method for manufacturing of wood flour/PP composites with better fire retardancy and mechanical properties
This study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. The resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. But by increasingof fire retar...
متن کاملDynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کامل