Multiobjective Design Optimization of 3–PRR Planar Parallel Manipulators
نویسندگان
چکیده
This paper addresses the dimensional synthesis of parallel kinematics machines. A multiobjective optimization problem is proposed in order to determine optimum structural and geometric parameters of parallel manipulators. The proposed approach is applied to the optimum design of a three-degree-of-freedom planar parallel manipulator in order to minimize the mass of the mechanism in motion and to maximize its regular shaped workspace.
منابع مشابه
Comparison of Planar Parallel Manipulator Architectures based on a Multi-objective Design Optimization Approach
This paper deals with the comparison of planar parallel manipulator architectures based on a multi-objective design optimization approach. The manipulator architectures are compared with regard to their mass in motion and their regular workspace size, i.e., the objective functions. The optimization problem is subject to constraints on the manipulator dexterity and stiffness. For a given externa...
متن کاملOptimization of the Kinematic Sensitivity and the Greatest Continuous Circle in the Constant-orientation Workspace of Planar Parallel Mechanisms
This paper presents the results of a comprehensive study on the efficiency of planar parallel mechanisms, considering their kinetostatic performance and also, their workspace. This aim is approached upon proceeding single- and multi-objective optimization procedures. Kinetostatic performances of ten different planar parallel mechanisms are analyzed by resorting to a recent index, kinematic sens...
متن کاملComparison of 3-rpr Planar Parallel Manipulators with Regard to Their Kinetostatic Performance and Sensitivity to Geometric Uncertainties
ABSTRACT: This paper deals with the sensitivity analysis of 3-RPR planar parallel manipulators. First, the manipulators under study as well as their degeneracy conditions are presented. Then, an optimization problem is formulated in order to obtain their maximal regular dexterous workspace. Moreover, the sensitivity coefficients of the pose of the manipulator moving platform to variations in th...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کاملContribution to the optimization of closed-loop multibody systems : application to parallel manipulators
1. Abstract This paper describes an original and robust method to optimize the design of closed-loop mechanisms, especially parallel manipulators. In other words, these mechanisms include assembling constraints we solved using a Newton-Raphson algorithm which may fail when the Jacobian matrix of the constraints is ill-conditioned. Therefore, the technique we propose takes advantage of that cond...
متن کامل