Response Surface Modeling
نویسنده
چکیده
In response surface models the expected response is usually taken to be a low degree polynomial in the design variables that are coded from the factor settings. We argue that an overparameterized polynomial representation of the expected response ooers great economy and transparency. As an illustration, we exhibit a constructive path of design improvement relative to the Kiefer design ordering, for polynomial regression up to degree three when the experimental domain is a ball.
منابع مشابه
Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant
Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant
متن کاملExperimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays
In this work, three types of natural clays including kaolinite, montmorillonite, and illite with different molecular structures, as adsorbents, are selected for the removal of methylene blue dye, and their performance is investigated. Also the optimization and the analysis of the dye adsorption mechanism are performed using the response surface methodology, molecular modeling, and experimental ...
متن کاملHydrothermal synthesis of surface-modified copper oxide-doped zinc oxide nanoparticles for degradation of acid black 1: Modeling and optimization by response surface methodology
Dyes are widely used in various industries most of them are not readily biodegradable and are consisted of number of toxic, mutagenic, and carcinogenic compounds. Therefore, it is essential to remove them from effluent before their discharge to the environment. The objective of this investigation was to synthesize copper oxide (CuO) doped zinc oxide (ZnO) nanoparticles under mild hydrothermal c...
متن کاملResponse surface methodology and artificial neural network modeling of reactive red 33 decolorization by O3/UV in a bubble column reactor
In this work, response surface methodology (RSM) and artificial neural network (ANN) were used to predict the decolorization efficiency of Reactive Red 33 (RR 33) by applying the O3/UV process in a bubble column reactor. The effects of four independent variables including time (20-60 min), superficial gas velocity (0.06-0.18 cm/s), initial concentration of dye (50-150 ppm), and pH (3-11) were i...
متن کاملResponse Surface Methodology Modeling to Determine of Trace Amounts of Phenolic Compounds Using Silver Modified / Zero Valent Iron/ Fe3O4@G Nanocomposite
In this study, a simple and fast magnetic dispersive solid phase extraction methodology was developed G@Fe3O4/Fe/Ag nanoparticles for preconcentration and determine of phenolic compounds in water samples. The sorbent was characterized by assorted characterization method. The effects of diverse factor on the extraction process were studied thoroughly via design of experiment and desirability fun...
متن کاملModeling and optimization of oil refinery wastewater chemical oxygen demand removal in dissolved air flotation system by response surface methodology
In this present study the dissolved air flotation (DAF) system was investigated for the treatment of Kermanshah Oil Refinery wastewater. The effect of three parameters on flotation efficiency including of flow rate (outflow from the flotation tank), saturation pressure and coagulant dosage on chemical oxygen demand (COD) removal was examined experimentally. All the experiments were done under a...
متن کامل