Characterisation of an electrical heating method for metallic-coated optical fibres for distributed sensing applications
نویسندگان
چکیده
In several applications a temperature contrast between the sensing fibre and the environment is required to detect changes in the environmental heat capacity. For this purpose the process of electrical heating in metallic-coated fibres is theoretically analysed and modelled in steady-state conditions based on the thermal energy generated by resistive heating and the losses induced by convection and radiation. The impact of ambient temperature and pressure is investigated. The proposed model for the thermal exchange is experimentally validated using a high-resolution Brillouin distributed fibre sensor, which is used to measure the longitudinal profile of the temperature reached by electrical heating along an Alcoated optical fibre.
منابع مشابه
Thermal characterization of micro/nanoscale conductive and non-conductive wires based on optical heating and electrical thermal sensing
In this work, a technique based on optical heating and electrical thermal sensing (OHETS) is developed to characterize the thermophysical properties of one-dimensional micro/nanoscale conductive and non-conductive wires. In this method, the to-be-measured thin wire is suspended over two electrodes and is irradiated with a periodically modulated laser beam. The laser beam induces a periodical te...
متن کاملTapered Optical Fiber Coated with ZnO Nanorods for Detection of Ethanol Concentration in Water
This work presents ZnO nanorods coated multimode optical fiber sensing behavior in response to ethanol solution. The sensor operates based on modulation of light intensity which arises from manipulation of light interaction with the ambient environment in sensing region. For this purpose, two steps are experimentally applied here; etching and then coating fiber with ZnO nanorods to provide stro...
متن کاملMilliKelvin resolution in cryogenic temperature distributed fibre sensing based on coherent Rayleigh scattering
The response of a distributed temperature sensor based on coherent Rayleigh scattering is experimentally studied in the temperature range from 77 K up to 300 K, using fibres with standard and ORMOCER coating. A precise and absolute frequency scan is performed to obtain the best temperature resolution that turns out to be in the mK range. Experimental results point out that heating and cooling p...
متن کاملEffect of Annealing Temperature on Structural, Electrical and Optical Properties of TiO2 Nanopowder
TiO2 nanopowder is prepared by simple sol-gel method using starting material as titanium isopropoxide with methanol and annealed at 600°C, 700°C and 800°C for 1 hour in air. X-ray diffraction pattern revealed the presence of both anatase and rutile phase in TiO2 specimens annealed at different temperatures. It is observed that the content of rutile phase and crystallite size increases with incr...
متن کاملA New Structure for Direct Measurement of Temperature Based on Negative Temperature Coefficient Thermistor and Adaptive Neuro-fuzzy Inference System
Thermistors are very commonly used for narrow temperature-range high-resolution applications, such as in medicine, calorimetry, and near ambient temperature measurements. In particular, Negative Temperature Coefficient (NTC) thermistor is very inexpensive and highly sensitive, whose sensing temperature range and sensitivity are highly limited due to the intrinsic nonlinearity and self-heating p...
متن کامل