Structure of Evaporating Diesel Sprays
نویسندگان
چکیده
Performance of compression ignition engine is known to be spray characteristics related. Precise experimental information on fuel sprays is of utmost importance to model the fuel spray formation and its development in the engine combustion chamber. The previous experimental work of the present author on non-evaporating sprays produced by using a FIAT single-hole orifice type nozzle and a distribution type commercial fuel injection pump forms the basis to derive correlations for penetration rates, break up times and lengths of diesel sprays. The results are compared with the existing published work and the agreement is found ideal. The correlations derived can be useful to do CFD modeling of sprays under variable conditions of injector nozzle hole diameter, fuel injection pressure, combustion chamber pressure and temperature or air density.
منابع مشابه
Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines
0010-2180/$ see front matter 2010 The Combust doi:10.1016/j.combustflame.2010.02.018 * Corresponding author. Address: University of Illin Mechanical & Industrial Engineering, 842 West Tayl 7022, USA. Fax: +1 312 413 0441. E-mail address: [email protected] (S.K. Aggarwal). Injector flow dynamics and primary breakup processes are known to play a pivotal role in determining combustion and emissions in d...
متن کاملAssessment of Atomization Models for Diesel Engine Simulations
Liquid fuel injection and atomization have a significant influence on the combustion and emission characteristics of diesel engines. Using x-ray radiography, it is possible to obtain quantitative and time-resolved data in the primary breakup region close to the injector nozzle. However, most previous studies on model validations have employed optical measurements that are not applicable in this...
متن کاملLarge Eddy Simulation of dispersed multiphase flow
This thesis covers two main topics. The first is the comparison between the Reynoldsaveraged Navier-Stokes (RANS) simulation and the Large Eddy Simulation (LES) of high injection pressure diesel sprays under non-evaporating or evaporating conditions. The second topic is the comparison of the fuel behavior in the spray process between the hydrotreated vegetable oil (HVO) and the conventional EN ...
متن کاملSimulation of Oblique Evaporating Diesel Sprays, and Comparison with Empirical Correlations and Simulated Straight Sprays
The innovation in software analysis and various available programming facilities have urged the designers at various levels to do indispensable calculations for engine flows. Presently, the 3-D analysis approach is under practice to do simulations for various parameters involving engine operations using various softwares, “Fluent” being the trendiest at the moment for CFD modeling. The present ...
متن کاملSimulation of Non –Evaporating Diesel Sprays and Comparison with Empirical Correlation
The very first requirement to effectively use a computational fluid dynamics model is to prepare a 3D physical geometric model of the problem. Analysis of the fuel spray process involves specification of chamber space like bore and stroke of an internal combustion engine. Fluent software needs geometric meshing which in the present case is carried out using commercially available Gambit softwar...
متن کامل