On the transformation behaviour of NiTi particulate reinforced AA2124 composites

نویسندگان

  • R. R. Thorat
  • D. D. Risanti
  • G. Garces
  • P. E. J. Rivera
  • Dı́az del Castillo
  • S. van der Zwaag
چکیده

The transformation behaviour of AA2124 alloys reinforced NiTi particulates of 10 vol pct and 20 vol pct has been studied by differential scanning calorimetry (DSC), thermoelectric power (TEP) and internal friction (IF). Addition of NiTi particulates increase the damping capacity as well as the precipitation kinetics of AA2124 composites with respect to the base AA2124. Heat treatments performed to change the matrix condition do not alter the transformation significantly, other than homogeneising the Al level in the particulates, which is present due to the preceeding extrusion treatment. The presence of Al in NiTi stabilizes the R-phase transformation but the Ms remains stable. Preprint submitted to Journal of Alloys and Compounds 19 September 2008

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of TiC particulate reinforcement on the corrosion behaviour of Al 6061 metal matrix composites

Aluminum matrix composites (AMCs), reinforced with ceramic particulates, have significant applications in the field of aerospace, marine, automobiles, sports and recreation. Al-TiC particulate composite has better potential for high-temperature applications. The corrosion behaviour of Al 6061-TiC particulate composites prepared by stir casting route, has been explored in chloride medium using e...

متن کامل

Stress-induced martensitic transformations in NiTi and NiTi–TiC composites investigated by neutron diffraction

Superelastic NiTi (51.0 at.% Ni) specimens reinforced with 0, 10 and 20 vol.% TiC particles were deformed under uniaxial compression while neutron diffraction spectra were collected. The experiments yielded in-situ measurements of the thermoelastic stress-induced transformation. The evolution of austenite/martensite phase fractions and of elastic strains in the reinforcing TiC particles and the...

متن کامل

Nonlinear Thermo-Mechanical Behaviour Analysis of Activated Composites With Shape Memory Alloy Fibres

General thermo-mechanical behavior of composites reinforced by shape memory alloy fibers is predicted using a three-dimensional analytical micromechanical method to consider the effect of fibers activation. Composite due to the micromechanical method can be exposed to general normal and shear mechanical and thermal loading which cause to activate the shape memory alloy fibers within polymeric m...

متن کامل

Fatigue crack-growth in shape-memory NiTi and NiTi–TiC composites

An experimental study was conducted to examine the room-temperature fatigue crack-growth characteristics of shape-memory NiTi matrix composites reinforced with 10 and 20 vol.% of TiC particles. Microstructural characterization of these hot-isostatically-pressed materials shows that the TiC particles do not react with the NiTi matrix and that they lack any texture. Overall fatigue crack-growth c...

متن کامل

Development of Bone Particulate Reinforced Epoxy Composite For Biomedical Application

Mechanical properties of particulate goat bone reinforced epoxy composite were investigated in this research. This was aimed at assessing the suitability of the developed composites for biomedical applications. The combination of the two materials for the development of the composites was targeted to meet good surface compatibility in addition to the structural compatibility needed as biomateri...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012