Nanostructures on surfaces of the metalorganic compound {Fe2(CO)6[µ-S2C6H2(OH)2]} and its potential as catalyst precursor for the synthesis of carbon nanotubes.
نویسندگان
چکیده
The compound {Fe(2)(CO)(6)[µ-S(2)C(6)H(2)(OH)(2)]} is organized by H-bond interactions on graphite and SiO(2) surfaces as micron-length nanofibres. Thermal degradation of these fibres adsorbed on SiO(2) leads to a very homogeneous surface filled with Fe(2)O(3) nanoparticles (ca. 2.5 nm diameter) suitable to produce few-walled carbon nanotubes laying on a clean surface.
منابع مشابه
Synthesis and Characterization of Carbon Nanotubes Catalyzed by TiO2 Supported Ni, Co and Ni-Co Nanoparticles via CCVD
Monometallic and bimetallic Ni and Co catalytic nanoparticles supported on Titanium dioxide (rutile phase) substrate were prepared by wet impregnation method. These nanoparicles were used as catalysts for synthesis of multiwalled carbon nanotubes (MWCNTs) from acetylene decomposition at 700°C by the catalytic chemical vapor deposition (CCVD) technique. The nanomaterials (catalyst and CNTs) were...
متن کاملNew method for preparation of MWCNT-SO3H as an efficient and reusable catalyst for the solvent-free synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones
Multiwalled carbon nanotubes (MWCNTs) have been functionalized with -SO3H groups using new three steps chemical routes. Firstly, OH groups have been attached to CNT surfaces through a radical reaction. The second step involves converting the hydroxyl groups into the oxide one and last step included the attachment of –SO3H groups on the MWCNTs surfaces in the presence of 1-butyl-3-methyl imidazo...
متن کاملNew method for preparation of MWCNT-SO3H as an efficient and reusable catalyst for the solvent-free synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones
Multiwalled carbon nanotubes (MWCNTs) have been functionalized with -SO3H groups using new three steps chemical routes. Firstly, OH groups have been attached to CNT surfaces through a radical reaction. The second step involves converting the hydroxyl groups into the oxide one and last step included the attachment of –SO3H groups on the MWCNTs surfaces in the presence of 1-butyl-3-methyl imidazo...
متن کاملDeactivation Behavior of Carbon Nanotubes Supported Cobalt Catalysts in Fischer-Tropsch Synthesis
The effects of electronic properties of inner and outer surfaces of Carbon Nano Tubes (CNTs) on the deactivation of cobalt Fischer-Tropsch (FT) catalysts were studied. The comparative characterization of the fresh and used catalysts by TEM, XRD, TPR, BET and H2 chemisorption showed that cobalt re-oxidation, cobalt-support interactions and sintering are the main sources o...
متن کاملCatalyst of Ni and Co dependencies for carbon nanotube synthesis by CVD method
In this research, the effect of catalyst type on the CNTs synthesis was investigated. The carbonnanotubes (CNTs) were produced on stainless steel substrates and two of catalyst with differentcharacteristics by using Thermal chemical vapor deposition (TCVD) method. The catalysts have theimportant role for the growth carbon nanotubes (CNTs). Acetylene gas (C2H2) diluted by NH3 wasused as the reac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Dalton transactions
دوره 40 13 شماره
صفحات -
تاریخ انتشار 2011