The Effected Oxide Capacitor in CMOS Structure of Integrated Circuit Level 5 Micrometer Technology
نویسندگان
چکیده
This article is present the effected oxide capacitor in CMOS structure of integrated circuit level 5 micrometer technology. It has designed and basic structure of MOS diode. It establish with aluminum metallization layer by sputtering method, oxide insulator layer mode from silicon dioxide, n and p semiconductor layer, it has high capacitance concentrate. From the MOS diode structure silicon dioxide thickness 0.5 micrometer, it will get capacitance between aluminum metal layer and p semiconductor at 28.62 pF, the capacitance between aluminum metal layer and n semiconductor at 29.55 pF. In this article establish second metal layer for measurement density values of first aluminum metal layer with second aluminum metal layer, it has density values at 16 pF.
منابع مشابه
Design of power-efficient adiabatic charging circuit in 0.18μm CMOS technology
In energy supply applications for low-power sensors, there are cases where energy should be transmitted from a low-power battery to an output stage load capacitor. This paper presents an adiabatic charging circuit with a parallel switches approach that connects to a low-power battery and charges the load capacitor using a buck converter which operates in continuous conduction mode (CCM). A gate...
متن کاملSwitched-Capacitor Dynamic Threshold PMOS (SC-DTPMOS) Transistor for High Speed Sub-threshold Applications
This work studies the effects of dynamic threshold design techniques on the speed and power of digital circuits. A new dynamic threshold transistor structure has been proposed to improve performances of digital circuits. The proposed switched-capacitor dynamic threshold PMOS (SC-DTPMOS) scheme employs a capacitor along with an NMOS switch in order to effectively reduce the threshold voltage of ...
متن کاملCapacitor-couple ESD protection circuit for deep-submicron low-voltage CMOS ASIC
Capacitor-couple technique used to lower snapbacktrigger voltage and to ensure uniform ESD current distribution in deep-submicron CMOS on-chip ESD protection circuit is proposed. The coupling capacitor is realized by a poly layer right under the wire-bonding metal pad without increasing extra layout area to the pad. A timing-original design model has been derived to calculate the capacitor-coup...
متن کاملMetal-layer capacitors in the 65 nm CMOS process and the application for low-leakage power-rail ESD clamp circuit
Between the metal–insulator–metal (MIM) capacitor and metal–oxide–metal (MOM) capacitor, the MIM capacitor has a better characteristic of stable capacitance. However, the MOM capacitors can be easily realized through the metal interconnections, which does not need additional fabrication masks into the process. Moreover, the capacitance density of the MOM capacitor can exceed the MIM capacitor w...
متن کاملA Novel Structure for Realization of a Pseudo Two Path Band-Pass Filter
In this paper, a modified auto zeroed integrator is used to design and simulate a low-voltage high-Q switched capacitor pseudo 2-path filter. The filter is a sixth–order Chebyshev band-pass filter operating at sampling frequency of 1MHz and center frequency of 250 kHz with a quality factor of 50. The proposed filter has both low-voltage and high speed properties of the auto zeroed integrators ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره abs/0912.3971 شماره
صفحات -
تاریخ انتشار 2009