Plasma Polymerization SnOxCy Organic-like Films and Grafted PNIPAAm Composite Hydrogel with Nanogold Particles for Promotion Thermal Resistive Properties Running title: Plasma Polymerization to Improve Thermal Resistive Properties
نویسندگان
چکیده
In this study, a new type of temperature sensor device was developed. The circular electrode of the thermal sensitive sensor was modified with TMT and O2 plasma to enhance the conductivity by forming a thin SnOxCy layer on the electrode surface. The Nano-Au particles were subjected to O2 plasma pretreatment to form peroxide groups on the surface. The thermally sensitive sensor was made by mixing the above-treated Nano-Au particles with N-isopropylacrylamide (NIPAAm) to form solution and then UV-induced grafting polymerization of the NIPAAmcontaining solution onto the electrode substrate. The composite hydrogels on the electrode introduce thermo-sensitive polymeric surface films for temperature sensing. Using ambient environment resistance test to measure the resistance, the LCST (lower critical solution temperature) of Nano-Au (MUA) mixed with NIPAAm hydrogel was found to be 32 °C. At ambient temperatures higher than LCST, the electrode resistance decreases linearly.
منابع مشابه
Plasma Polymerization of SnOxCy Organic-Like Films and Grafted PNIPAAm Composite Hydrogel with Nanogold Particles for Promotion of Thermal Resistive Properties
In this study, a new type of temperature sensor device was developed. The circular electrode of the thermally sensitive sensor was modified with tetramethyltin (TMT) and O2 plasma to form a thin SnOxCy conductive layer on the electrode surface. The nano-Au particles (AuNPs) were subjected to O2 plasma pretreatment to form peroxide groups on the surface. The thermally sensitive sensor made by mi...
متن کاملSynthesis of Silica/Polystyrene Nanocomposite Particles by Miniemulsion Polymerization
Miniemulsion polymerization is one of heterogeneous polymerization method that can be effectively used to synthesis of various novel organic-inorganic nanocomposite particles. This method can provide opportunity of good incorporation between the polymer and inorganic phases in the formed submicrometer-sized particles. In this article, we report preparation polystyrene/silica nanocomposite p...
متن کاملIn-Situ Polymerization of UHMWPE Using Bi-Supported Ziegler-Natta Catalyst of MoS2 Oxide/MgCl2 (Ethoxide Type)/TiCl4/TiBA: Study of Thermo-Mechanical Properties of System
The use of UHMWPE has attracted the attention of many researchers and industries. The aim of the present work is to fabricate UHMWPE/MoS2-Oxide nano-composites using in-situ polymerization. For this purpose, modified molybdenum disulfide was used. In order to perform the polymerization, a Ziegler-Natta catalytic system, with MoS2-Oxide and magnesium Ethoxide as support, was used. In order to fa...
متن کاملEffect of Using Cold Plasma Treatment on the Surface and Physicochemical Properties of Starch-chitosan Composite Film
Background and Objectives: Cold plasma is an eco-friendly and non-thermal technique, which has become an important technology to change the physical and chemical features of polymers. Recently, cold plasma has been considered in the decontamination and modification of packaging materials in the food industry. Therefore, the objective of this study was to survey the effect of using low-pressure ...
متن کاملSynthesis of Polythiophene/Manganese Dioxide Nanocomposites by In-situ Core-shell Polymerization Method and Study of their Physical Properties
The present research work describes an efficient method for facile synthesis of α-MnO2 nanorods by hydrothermal method and preparation of a series of polythiophene/manganese dioxide (PTh/MnO2) nanocomposites with various α-MnO2 ratios. These nanocomposites were fabricated by in-situ oxidative polymerization method using FeCl3 as oxidant, and characterized by Fourier transformed infrared (FT-IR)...
متن کامل