Design of Experiments for Coatings
نویسندگان
چکیده
منابع مشابه
Failure Mechanisms Investigation in Thermal Barrier Coatings under Isothermal and Non-sothermal Fatigue Loadings using Design of Experiments
In this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. In this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...
متن کاملOptimization of a Waterborne Epoxy Coatings Formulation via Experimental Design
Waterborne Epoxy based coatings were prepared by using a water-borne epoxy resin and a suitable hardener. The formulation and optimization procedure were carried out on the bases of experimental designs by the mixture design technique in which the important paint properties are modeled by using special cubic model. The corrosion behavior of these coatings was investigated using electrochemical ...
متن کاملNanoporous anodized aluminum thickness optimization through pulse current mode
The purpose of this study was to optimize the thickness of anodizing Aluminum coatings processed under pulse current mode through the Design of Experiments (DOE) method. Thickness measurement, polarization and electrochemical impedance spectroscopy were employed to take Thickness and corrosion behaviors of the anodized coatings into consideration. Also, Field-emission scanning electron microsco...
متن کاملIR-reflective Opaque Water-based Acrylic Coatings on White Pine Wood Substrates
Two sets of opaque water-based acrylic coatings were prepared with IR-reflective pigments and conventional pigments. The objective of this work was to determine the efficiency of IR-reflective pigments in limiting the heat buildup of opaque coating formulations. Experiments performed on PVC substrates revealed that IR-reflective pigments significantly decreased the temperature increase above ro...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کامل