Microplane damage model for jointed rock masses
نویسندگان
چکیده
The paper presents a new microplane constitutive model for the inelastic behavior of jointed rock masses that takes into account the mechanical behavior and geometric characteristics of cracks and joints. The basic idea is that the microplane modeling of rock masses under general triaxial loading, including compression, requires the isotropic rock matrix and the joints to be considered as two distinct phases coupled in parallel. A joint continuity factor is defined as a microplane damage variable to represent the stress-carrying area fraction of the joint phase. Based on the assumption of parallel coupling between the rock joint and the rock matrix, the overall mechanical behavior of the rock is characterized by microplane constitutive laws for the rock matrix and for the rock joints, along with an evolution law for the microplane joint continuity factor. The inelastic response of the rock matrix and the rock joints is controlled on the microplane level by the stress–strain boundaries. Based on the arguments enunciated in developing the new microplane model M7 for concrete, the previously used volumetric–deviatoric splits of the elastic strains and of the tensile boundary are avoided. The boundaries are tensile normal, compressive normal, and shear. The numerical simulations demonstrate satisfactory fits of published triaxial test data on sandstone and on jointed plaster mortar, including quintessential features such as the strain softening and dilatancy under low confining pressure, as well as the brittle–ductile transition under higher confining pressure, and the decrease of jointed rock strength and Young’s modulus with an increasing dip angle of the joint. Copyright © 2014 John Wiley & Sons, Ltd.
منابع مشابه
Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system
Having knowledge of stability of an underground space depends on stresses and strains around it. Creating underground tunnels leads to significant changes in the rock mass stress. Therefore, to achieve the necessary stability, stresses and deformations around the tunnel must be examined carefully. Usually, stress-strain behavior analysis is conducted in two-dimensional mode. This paper was cond...
متن کاملCharacterization of Strength and Deformation of Jointed Rock Mass Based on Statistical Analysis
This paper deals with the statistical analysis of the uniaxial compressive strength and of the elastic modulus of jointed rock masses under different confining pressures. Properties of the rock masses with different joint fabric, with and without gouge have been considered in the analysis. A large amount of experimental data of jointed rock masses from the literature has been compiled and used ...
متن کاملConstitutive Modeling of Rocks, Rock Joints and Rock Masses including Strain Softening Behaviour
The rocks are formed through very complex processes and the complex behaviour of rock masses is dominated by the planes of weaknesses . Rock mass consists of intact rock and discontinuities. Many rocks show strain softening behaviour under loads. In this paper, the constitutive models for intact rocks and rock joints are presented. These form the basis for the development of constitutive models...
متن کاملEquivalent continuum analyses of jointed rockmass: Some case studies
The paper presents summary of the work carried out by the author on the modelling of jointed rock mass with some field applications. The equivalent continuum analyses approach presented attempts to use statistical relations, which are simple and obtained after analyzing a large data from the literature on laboratory test results of jointed rock masses. Systematic investigations were done includ...
متن کاملDiscrete element modeling of explosion-induced fracture extension in jointed rock masses
The explosion process of explosives in a borehole applies a very high pressure on its surrounding rock media. This process can initiate and propagate rock fractures, and finally, may result in the rock fragmentation. Rock fragmentation is mainly caused by the propagation of inherent pre-existing fractures of the rock mass and also from the extension of the newly formed cracks within the intact ...
متن کامل