Indigenous Design of Electronic Circuit for Electrocardiograph
نویسندگان
چکیده
This paper provides electronic implementation of electrocardiograph (ECG) circuit by using instrumentation amplifier (IA) as bio-potential amplifier in such a manner which reduces noise, common voltage, DC offset value and RF interference from the existing circuit.Noise and common voltage can be removed from ECG using driven right leg circuit or by using isolator circuit. DC offset can be removed by using integrator as feedback. In the differential amplifier part of IA, we can add single resistance, T-network or inverter circuit with integrator to improve impulse response. By using filters, we can reduce RF interference. In this paper, we have used instrumentation amplifier as a bio-potential amplifier.
منابع مشابه
Low-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کاملA Micropower Current-Mode Euclidean Distance Calculator for Pattern Recognition
In this paper a new synthesis for circuit design of Euclidean distance calculation is presented. The circuit is implemented based on a simple two-quadrant squarer/divider block. The circuit that employs floating gate MOS (FG-MOS) transistors operating in weak inversion region, features low circuit complexity, low power (<20uW), low supply voltage (0.5V), two quadrant input current, wide dyn...
متن کاملDesign Modification of Rogowski Coil for Current Measurement in Low Frequency
The principle object of this paper is to offer a modified design of Rogowski coil based on its frequency response. The improvement of the integrator circuit for nullifying the phase difference between the waveforms of the measured-current and the corresponding terminal voltage is a further object of this investigation. This paper addresses an accurate, yet more efficient measuring and protect...
متن کاملControl of Series Resonant Converter with Robust Performance Against Load and Power Circuit Components Uncertainties
Robust performance controller design for duty-cycle controlled series resonant converter (SRC) is proposed in this paper. The uncertainties of the converter are analyzed with load variation and power circuit components tolerances are taken into consideration. Additionally, a nominal performance (NP) controller is designed. Closed-loop system is simulated with Orcad and simulation results of r...
متن کاملAnalysis of Electric Field and Polarization of SF6 Circuit Breaker to Approach a Suitable Structure
Abstract: The application of electric field theory to widely different aspects of electrical insulation has led to more understanding the phenomena. Electric fields may be considered as the main reason for insulation failure. The purpose of this paper is to modify importance of analyzing electric field in insulation design. The SF6 circuit breaker is chosen as case study that encounters cri...
متن کامل