Estimating Cetacean Carrying Capacity Based on Spacing Behaviour

نویسندگان

  • Janelle E. Braithwaite
  • Jessica J. Meeuwig
  • K. Curt S. Jenner
چکیده

Conservation of large ocean wildlife requires an understanding of how they use space. In Western Australia, the humpback whale (Megaptera novaeangliae) population is growing at a minimum rate of 10% per year. An important consideration for conservation based management in space-limited environments, such as coastal resting areas, is the potential expansion in area use by humpback whales if the carrying capacity of existing areas is exceeded. Here we determined the theoretical carrying capacity of a known humpback resting area based on the spacing behaviour of pods, where a resting area is defined as a sheltered embayment along the coast. Two separate approaches were taken to estimate this distance. The first used the median nearest neighbour distance between pods in relatively dense areas, giving a spacing distance of 2.16 km (± 0.94). The second estimated the spacing distance as the radius at which 50% of the population included no other pods, and was calculated as 1.93 km (range: 1.62-2.50 km). Using these values, the maximum number of pods able to fit into the resting area was 698 and 872 pods, respectively. Given an average observed pod size of 1.7 whales, this equates to a carrying capacity estimate of between 1187 and 1482 whales at any given point in time. This study demonstrates that whale pods do maintain a distance from each other, which may determine the number of animals that can occupy aggregation areas where space is limited. This requirement for space has implications when considering boundaries for protected areas or competition for space with the fishing and resources sectors.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Estimating the carrying capacity of tourism and the necessity of forest stands management (Case study: Darkeshforest, North Khorasan, Iran)

This study focuses on the carrying capacity estimation for Darkesh forest in Northeast Iran. Four factors were used for estimating the carrying capacity including tourist flows, size of the area, optimum space available for each tourist, and visiting time. Results showed that the physical carrying capacity was 2727 ha or 165 visitors/day, while the real carrying capacity was 2719 ha or 132 visi...

متن کامل

Experimental Study for Strength Capacity of Cold-Formed Steel Joists Connections with Consideration of Various Bolts Arrangements

With growth the construction technologies, Cold-Formed Steel, CFS, sections are widely used in ordinary steel buildings because of some advantages such as light weight, ease of installation, decrease in cost, and increase in speed of operation. Using the bolted connections for CFS joist is one of the best details for steel structures. The main objective of this study is to conduct an experiment...

متن کامل

ارزیابی ظرفیت برد گردشگری منطقه حفاظت شده قیصری در استان چهارمحال و بختیاری

It is now certain that to ensure a long term sustainable development, protected areas, the favored destinations for ecotourism, required a well written planning management. Each destination however has limited capability which is called “carrying capacity” to invite visitors. Physical, real (ecological) and effective (manageable) are different kinds of carrying capacity. The current study prese...

متن کامل

Determination of Lateral load Capacity of Steel Shear Walls Based on Artificial Neural Network Models

In this paper, load-carrying capacity in steel shear wall (SSW) was estimated using artificial neural networks (ANNs). The SSW parameters including load-carrying capacity (as ANN’s target), plate thickness, thickness of stiffener, diagonal stiffener distance, horizontal stiffener distance and gravity load (as ANN’s inputs) are used in this paper to train the ANNs. 144 samples data of each of th...

متن کامل

Dynamic Load Carrying Capacity of Mobile-Base Flexible-Link Manipulators: Feedback Linearization Control Approach

This paper focuses on the effects of closed- control on the calculation of the dynamic load carrying capacity (DLCC) for mobile-base flexible-link manipulators. In previously proposed methods in the literature of DLCC calculation in flexible robots, an open-loop control scheme is assumed, whereas in reality, robot control is achieved via closed loop approaches which could render the calculated ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2012