Chemical modification of amikacin at C-4'' with inversion of configuration.
نویسندگان
چکیده
Sir: With the appearance of an aminoglycoside 4', 4"-nucleotidyl transferase,') selective modification of the clinical important amikacin (1) at these positions became of interest. Although enzymatic deactivation involving hydroxyl groups usually is overcome by "deoxygenation' 1,2) our efforts are focussed on the introduction of a substituent, which lacks ability to participate in a resistance mechanism but preserves the original polarity. At this time we wish to report on the synthesis and antibacterial activity of 4"-azido-4"-deoxy4"-epi-amikacin (13) and 4"-deoxy-4"-fluoro-4"epi-amikacin (14). To trace the effect of the configurational change itself as well as that of fluorination, 4"-epi-amikacin (15) and 6"-deoxy6"-fluoroamikacin (9) were also prepared. Starting from 1, protection of the amino functions with the tent-butoxycarbonyl (Boc) group by reaction with di-tert-butyl dicarbonate in DMSO H_O (95: 5) for 6 hours at 60°C gave 3,6',3",4"'-tetra-N-Boc-amikacin3' (2) in 96 yield. Its treatment with chi orotriphenylmethane
منابع مشابه
Experimental Investigation of Phase Inversion of Liquid-Liquid Systems in a Spray Extraction Column
An experimental study of the phase inversion behavior of liquid-liquid dispersion has been conducted in a spray extraction column for systems of toluene / water, n-hexane/water, CCl4/water, toluene /water + glycerol (25 % wt), toluene + CCl4 (25 % wt) / water and toluene / acetic acid (5 % wt)/water. The effects of physical properties, mass transfer and column geometry...
متن کاملA Simple, Artistic and Efficient Modification of the Inversion Method
The simplest and fastest way of producing an acceptable and accurate cast is by adopting the two-pour or inversion method. This process is slightly cumbersome and messy due to difficulty of access. A much more efficient, easy and artistic way of accomplishing it is described by adopting a Rotating Cake Icing Table with a Silicone Baking Mat on top as an autoclavable non-stick barrier.
متن کاملSeparation Efficiency of Epoxified-Polyethersulfone Blend Membrane for Chromium Removal
A microporous bisphenol A diglycidyl ether (DGEBA) epoxified-polyethersulfone (PES) blend membrane (EPES membrane) was prepared through dry-wet phase inversion. This study attempts to correlate the changes in membrane physical and chemical properties when the EPES membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (VI)....
متن کاملChemical modification of maleic anhydride polymers with carbazole
Maleic anhydride (MAN) copolymers with methyl methacrylate(MMA), ethyl methacrylate(EMA), methyl acrylate(MA), ethyl acrylate (EA) and buthyl acrylate (BA) ( in a 1:1 mole ratio) were synthesized by free radical polymerizations method under vacuum -azobis(isobutironitrile)(AIBN) as an initiator of reaction at 701C. The copolymer compositions were determined using related 1H NMR spectra techni...
متن کاملThermal and chemical modification of bentonite for adsorption of an anionic dye
Raw bentonite (RB), a known low-cost versatile clay was used as an adsorbent. RB was treated thermally and chemically to increase its adsorption capacity. For thermal treatment (TTB), the bentonite was heated at 400 °C for 60 min, and for the chemical modification, its surface was treated by cetyltrimethylammonium bromide (CTAB) to prepare organo-modified bentonite (CTAB-B). The removal of Cong...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Journal of antibiotics
دوره 38 2 شماره
صفحات -
تاریخ انتشار 1985