Respiratory exposure to components of water-miscible metalworking fluids.
نویسندگان
چکیده
Water-miscible metalworking fluids (MWFs) are capable of causing respiratory symptoms and diseases. Recently, much emphasis has been put on developing new methods for assessing respiratory exposure to MWF emulsions. The air concentrations of ingredients and contaminants of MWF and inhalable dust were measured in 10 metal workshops in southern Finland. Oil mist was determined by infra red spectroscopy analysis after tetrachloroethylene extraction from the filter. Aldehydes were collected on Sep-Pak chemosorbents and analysed by liquid chromatography. Volatile organic compounds (VOCs) were collected on Tenax adsorbents and analysed by gas chromatography with mass spectrometric detection after thermal desorption. Endotoxins were collected on glass fibre filter and analysed by enzyme-based spectrophotometry, and viable microbes were collected on polycarbonate filter and cultured. Inhalable dust was collected on cellulose acetate filter and quantified gravimetrically. Associations between the different exposures were calculated with Spearman's correlations. The mean concentration of oil mist was 0.14 (range <0.010-0.60) mg m(-3). The mean total concentration of aldehydes was 0.095 (0.026-0.38) mg m(-3), with formaldehyde as the main aldehyde. The average total concentration of VOC was 1.9 (0.34-4.5) mg m(-3) consisting mainly of high-boiling aliphatic hydrocarbons. Several potential sensitizing chemicals such as terpenes were found in small quantities. The concentration of microbial contaminants was low. All the measured air concentrations were below the Finnish occupational exposure limits. The exposure in machine shops was quantitatively dominated by volatile compounds. Additional measurements of MWF components such as aldehydes, alkanolamines and VOCs are needed to get more information on the chemical composition of workshops' air. New air cleaning methods should be introduced, as oil mist separators are insufficient to clean the air of small molecular impurities.
منابع مشابه
Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review
The increasing attention to the environmental and health impacts of industrial activities by governmental regulations and by the growing awareness level in the society is forcing industrialists to reduce the use of mineral oil-based metalworking fluids as cutting fluid. Cutting fluids have been used extensively in metal cutting operations for the last 200 years. In the beginning, cutting fluids...
متن کاملThe Occupational Exposure Limit for Fluid Aerosol Generated in Metalworking Operations: Limitations and Recommendations
The aim of this review was to assess current knowledge related to the occupational exposure limit (OEL) for fluid aerosols including either mineral or chemical oil that are generated in metalworking operations, and to discuss whether their OEL can be appropriately used to prevent several health risks that may vary among metalworking fluid (MWF) types. The OEL (time-weighted average; 5 mg/m(3), ...
متن کاملMicroorganisms in metalworking fluids: current issues in research and management.
The microbial contamination of water miscible metalworking fluids (MWFs) is a serious problem in metal industry. A good maintenance of MWF re-circulation systems can extend the lifetime of coolants and ensure the quality of the tools produced. In MWFs, as in the other water-based environments, microorganisms usually live in the form of biofilms, the communities of bacteria and fungi attached to...
متن کاملHypersensitivity Pneumonitis Associated with Environmental Mycobacteria
A previously healthy man working as a machine operator in an automotive factory developed respiratory symptoms. Medical evaluation showed abnormal pulmonary function tests, a lung biopsy showed hypersensitivity pneumonitis, and his illness was traced to his work environment. His physician asked the employer to remove him from exposure to metalworking fluids. Symptoms reoccurred when he was late...
متن کاملEvaluating workers' exposure to metalworking fluids and effective factors in their dispersion in a car manufacturing factory.
INTRODUCTION Metalworking fluids (MWFs), which are widely used in metal working operations, can cause different adverse effects, e.g., dermal and respiratory disorders, and cancer. Evaluating workers' exposure to MWF mists and the effective factors in their dispersion were the purpose of this study. MATERIALS AND METHOD Seventy-five out of 300 workers working in metalworking workshops were ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Annals of occupational hygiene
دوره 52 7 شماره
صفحات -
تاریخ انتشار 2008