An Integrated CMOS DC-DC Converter for Battery-Operated Systems
نویسندگان
چکیده
Abstract -This paper presents an optimum design for low-voltage, low-power DC-DC converter which has a controller and integrated CMOS switches using small size inductor (luH). Optimum design for single chip DC/DC converter is achieved by analyzing the amount of conduction and switching losses. Through the loss analyses, it is turned out that a constant frequency hard switching PWM converter with synchronous rectifier is most suitable among the several kinds of DC-DC converters for low voltage and low power applications.
منابع مشابه
Design of a CMOS DC-DC Converter -Adaptive CMOS DC-DC Converter for a Portable Battery Powered Systems-
Abstract In this paper, we describe a CMOS DC-DC converter with a variable output voltage (8-12V @100mA) for a portable battery-operated system applications. The proposed DC-DC converter is used along with a Pulse-Frequency Modulation (PFM) method and consists of a reference circuit, a feedback resistor, a controller, and an internal oscillator. The integrated DC-DC converter with two external ...
متن کاملA Buck-Boost Hybrid DC-DC Converter for Wearable Health Monitoring Devices
A hybrid approach of the DC-DC conversion is presented for battery-operated portable electronics systems such as wearable health monitoring devices. A switched-capacitor (SC) DC-DC converter is steered by hysteretic control to provide buck-boost conversion with a flexible conversion ratio, and its output is regulated by a low-drop-out (LDO) regulator delivering a low-ripple DC output. The SC DC...
متن کاملAn Integrated Voltage-Mode Boost DC-DC Converter for Portable Electronic Systems An Integrated Voltage-Mode Boost DC-DC Converter for Portable Electronic Systems
A monolithic CMOS voltage-mode, boost DC-DC converter with integrated power switches and on-chip pulse-width modulation (PWM) technique of switching control is presented in this paper. The PWM scheme used in this converter is constructed by a CMOS ring oscillator, whose duty is compensated by a pseudo hyperbola current generator to achieve almost constant frequency operation. The proposed boost...
متن کاملPower management circuits for ultra-low power systems
Power management circuits perform a wide range of vital tasks for electronic systems including DC-DC conversion, energy harvesting, battery charging and protection as well as dynamic voltage scaling. The impact of the efficiency of the power management circuits is highly profound for ultra-low power systems such as implantable, ingestible or wearable devices. Typically the size of the system fo...
متن کاملTwo-Stage Inverter Based on Combination of High Gain DC-DC Converter and Five-Level Inverter for PV-Battery Energy Conversion
This paper proposes a new two-stage inverter based on transformer-less high gain DC-DC converter for energy conversion of a photovoltaic system. The designed system consists of a high gain DC-DC converter cascaded with a three-phase inverter. The proposed DC-DC converter has a simple structure, and it has one switch in its structure. The output voltage of the DC-DC converter supplies DC source ...
متن کامل