Mechanical properties of La-based bulk amorphous alloy and composites
نویسندگان
چکیده
Influence of different microstructure of La-based fully amorphous samples and its composites on the impact fracture energy were investigated and discussed. Results showed improvement in fracture energy of glassy metals with the presence intermetallic phases, but deteriorated in the presence of dendrite phases and high volume % of crystalline phases.
منابع مشابه
EFFECTS OF TiO2 ADDITIVE ON ELECTROCHEMICAL HYDROGEN STORAGE PROPERTIES OF NANOCRYSTALLINE /AMORPHOUS Mg2Ni INTERMETALLIC ALLOY
Abstract: Mg2Ni alloy and Mg2Ni–x wt% TiO2 (x = 3, 5 and 10 wt %) composites are prepared by mechanical alloying. The produced alloy and composites are characterized as the particles with nanocrystalline/amorphous structure. The effects of TiO2 on hydrogen storage properties are investigated using anodic polarization and electrochemical impedance spectroscopy. It is demonstrated that the initia...
متن کاملMechanical Properties of Bulk Metallic Glasses and composites
We have studied the mechanical properties of monolithic bulk metallic glasses and composite in the La based alloys. La86-yAl14(Cu, Ni)y (y=24 to 32) alloy systems was used to cast the in-situ structure and subsequently tested under compression. We found that the ductility of the monolithic is actually poorer than that of the fully crystalline composite.
متن کاملAn investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior
Aluminum-based alloy composites with high strength and low density can be used in corrosive environments. In this research, the nano-powders of A16061 alloy and A16061/TiB2 composite were synthesized by mechanical alloying (MA) method. Then, A16061 /TiB2 nano-composite bulk samples were prepared at laboratory scale by hot extrusion approach. Transmission electron microscopy (TEM) and X-ray diff...
متن کاملEffect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملEffect of Varying Silicon Carbide Particulate on the Mechanical Properties of Aluminium Based Alloy Automobile Brake Disc Component
In the current study, effect of varying Silicon Carbide particulate on the mechanical properties of Aluminium based alloy automobile brake disc component was investigated. The result of experimental investigation on mechanical properties of Silicon Carbide particle reinforced Aluminium Matrix was achieved for composite brake disc using universal tensile test machine, Rockwell hardness testing m...
متن کامل