ISO 16840-2:2007 load deflection and hysteresis measurements for a sample of wheelchair seating cushions.
نویسندگان
چکیده
Load deflection and hysteresis measurements were made on 37 wheelchair seating cushions according to ISO 16840-2:2007. Load deflection plots for all 37 cushions are reported and fundamental aspects of graph interpretation discussed. ISO hysteresis data are also reported and interpretation discussed.
منابع مشابه
Applying ISO 16840-2 Standard to differentiate impact force dissipation characteristics of selection of commercial wheelchair cushions.
Results from applying the International Organization for Standardization (ISO) 16840-2 test method for determining the impact damping characteristics of 35 wheelchair cushions plus a high resilience (HR70) polyurethane reference foam sample are reported. The generation of impact forces when a wheelchair user either transfers onto a cushion or the wheelchair encounters rough terrain or bumps dow...
متن کاملInterface shear and pressure characteristics of wheelchair seat cushions.
Pressure ulcer incidence rates have remained constant despite advances in support surface technology. Interface shear stress is recognized as a risk factor for pressure ulcer development and is the focus of many shear reduction technologies incorporated into wheelchair cushions; however, shear reduction has not been quantified in the literature. We evaluated 21 commercial wheelchair seat cushio...
متن کاملDisplacement between the seating surface and hybrid test dummy during transitions with a variable configuration wheelchair: a technical note.
Changing seating posture can extend the amount of time a person can safely remain seated without damaging tissue or becoming fatigued. The Excelsior is an electrically powered wheelchair that utilizes sit-to-stand (STS) and sit-to-recline (STR) motions to aid in pressure relief. The motion of the wheelchair seating system must closely follow anatomical paths or ulcers may develop from the resul...
متن کاملThermodynamic rigid cushion loading indenter: a buttock-shaped temperature and humidity measurement system for cushioning surfaces under anatomical compression conditions.
A method is described for measuring the heat and water vapor dissipation characteristics of wheelchair cushions and seating systems while under simulated loading conditions. Thermal interaction between the body and seating surfaces can result in elevated tissue temperature and moisture build-up, which may increase the risk of pressure ulcers associated with prolonged ischemia or due to macerati...
متن کاملComparison of three wheelchair cushions for effectiveness of pressure relief.
OBJECTIVE Previous studies have suggested that no single wheelchair pressure-relieving cushion material was optimal for all persons with spinal cord injury (SCI). The purpose of this study was to compare the effectiveness of the short-term pressure-relieving ability of the three most commonly prescribed wheelchair cushions (Roho, Jay, Pindot) for a person with SCI. METHOD The number of pressu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Medical engineering & physics
دوره 36 4 شماره
صفحات -
تاریخ انتشار 2014