Self-phase modulation in chirped-pulse amplification.
نویسندگان
چکیده
The effect of self-phase modulation in chirped-pulse amplification is investigated. A numerical model is used to predict the effects of phase modulation on pulse recompression, and experimental results are presented that agree well with the calculations. We show that even moderate self-phase modulation can significantly distort the recompressed pulse after amplification, thereby reducing the peak power and degrading the pulse contrast.
منابع مشابه
Optical pulse compression based on nonlinear silicon waveguides and chirped Bragg gratings
Due to the growing demand for higher bandwidth, employing optical devices instead of electronic devices in data transmission systems has attracted much attention in recent years. Optical switches, modulators and wavelength converters are a few examples of the required optical devices. CMOS compatible fabrication of these devices, leads to much more growing of this technology. Optical pulse comp...
متن کاملDistributed nonlinear fiber chirped-pulse amplifier system.
A two-stage fiber-based femtosecond amplification system is presented, based on chirped-pulse amplification in highly nonlinear regime. The amount of self-phase modulation is separately adjusted in each stage selecting the proper stretching ratio in order to compensate gain narrowing. Analytical design rules are validated using numerical simulations. Our experimental implementation leads to the...
متن کاملSuppression of the pedestal in a chirped-pulse-amplification laser
The pedestal (prepulse and postpulse) associated with a chirped-pulse-amplification (CPA) laser is studied. Four components have been identified that contribute to the pedestal. Pulses are spectrally shaped by gain narrowing in a frequency-matched, regenerative amplifier, while self-phase modulation is avoided. The intensity contrast is further improved through the use of a saturable absorber, ...
متن کاملHigh Power Femtosecond Fiber Chirped Pulse Amplification System for High Speed Micromachining
The need for improved precision in a wide variety of micromachining applications has driven scientific interest in ultrashort pulse lasers. Despite numerous demonstrations of reduced heat effect and improved processing quality, the utility of such lasers has been limited by the heavy demands placed upon laser performance. In addition to high contrast laser pulses with minimal pulse-to-pulse flu...
متن کاملGeneration of 287 W, 5.5 ps pulses at 78 MHz repetition rate from a cryogenically cooled Yb:YAG amplifier seeded by a fiber chirped-pulse amplification system.
We generate linearly polarized, 287 W average-power, 5.5 ps pulses using a cryogenically cooled Yb:YAG amplifier at a repetition rate of 78 MHz. An optical-to-optical efficiency of 41% is obtained at 700 W pump power. A 6 W, 0.4 nm bandwidth picosecond seed source at 1029 nm wavelength is constructed using a chirped-pulse fiber amplification chain based on chirped volume Bragg gratings. The com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 19 24 شماره
صفحات -
تاریخ انتشار 1994