Fracture Toughness of Blends of Nylon 6 with Maleated Elastomers
نویسنده
چکیده
منابع مشابه
Toughening of thermoset polymers by rigid crystalline particles
The toughening of an aromatic amine-cured diglycidyl ether of bisphenoI-A epoxy with particles of crystalline polymers was studied. The crystalline polymers were poly(butylene terephthalate), nylon 6, and poly(vinylidene fluoride). Nylon 6 and poly(vinylidene fluoride) were found to toughen the epoxy about as well as did an equivalent amount of CTBN rubber. Poly(butylene terephthalate) was foun...
متن کاملNovel Functionalized Polyolefins as Compatibilizers in Polyolefin/polyamide 6 Blends and Polyethylene/metal Hydroxide Composites
Ricinoloxazoline maleinate (OXA) was grafted by melt free radical grafting onto polyolefins and elastomers to produce new compatibilizers for polymer blends. Effects of initial monomer and peroxide concentrations on the degree of grafting, on the amount of residual monomer, and on the side reactions were investigated. Reactive compatibilizers could be prepared with a suitable choice of processi...
متن کاملRenewable Elastomers Based on Blends of Maleated Polypropylene and Plasticized Starch
Most recent developments in polymers from renewable resources have focused on thermoplastics, whereas there has been no comparable development of plastics with elastomeric properties. Here we evaluate the possibility of developing renewable elastomers based on starch. Potato starch plasticized with glycerol (called plasticized starch, or PLS) was melt-blended with small quantities (5 wt % or 15...
متن کاملPossible phase transformation toughening of thermoset polymers by poly(butylene terephthalate)
Mechanisms were explored by which particles of poly(butylene terephthalate) (PBT) are able to toughen a brittle epoxy. The epoxy studied was an aromati(z amine-cured diglycidyl ether of bisphenoI-A, which was toughened at about twice the rate with particles of poly(butylene terephthalate) as with particles of nylon 6, poly(vinylidene fluoride), or CTBN rubber. Many of the mechanisms of tougheni...
متن کاملResponse Surface Based Optimization of Toughness of Hybrid Polyamide 6 Nanocomposites
Toughening of polyamide 6 (PA6)/ Nanoclay (NC) nanocomposites with styrene-ethylene/butadiene-styrene copolymer (SEBS) using maleated styrene-ethylene/butadiene-styrene copolymer (mSEBS)/ as a compatibilizer were investigated by blending them in a co-rotating twin-screw extruder. Response surface method of experimental design was used for optimizing the material and processing parameters. Effec...
متن کامل